Inov Blend Foam Polyether Polyol fun Firiji / firisa / Idabobo Ohun elo
Doncool 102 HCFC-141B mimọ parapo polyols
AKOSO
DonCool 102 jẹ polyols parapo, nlo HCFC-141B bi oluranlowo fifun, eyiti o jẹ iyipada ti CFC-11 ni ile-iṣẹ polyurethane, o kan si awọn firiji, yinyin ati awọn ọja idabobo igbona miiran, awọn abuda jẹ bi atẹle,
1. Agbara sisan ti o dara julọ, iwuwo foomu n pin kakiri iṣọkan, iwọn otutu kekere
2. Iduroṣinṣin iwọn otutu kekere ti o dara julọ ati iṣọkan
3. Demould akoko 6 ~ 8 iṣẹju
ENIYAN TI ARA
| Ifarahan | Bia ofeefee sihin omi |
| Hydroxyl iye mgKOH/g | 300-360 |
| Iyiyi iki (25℃) mPa.S | 250-500 |
| Walẹ kan pato (20℃) g/ml | 1.10-1.15 |
| Ibi ipamọ otutu ℃ | 10-25 |
| Osu aye ikoko | 6 |
RATIO ti a ṣe iṣeduro
|
| pbw |
| Doncool 102 | 100 |
| POL: ISO | 1.0:1.1 |
Imọ-ẹrọ ATI AṢE(iye gangan yatọ bi fun awọn ilana ilana)
|
| Dapọ pẹlu ọwọ | Ẹrọ titẹ giga |
| Awọn iwọn otutu ohun elo ℃ | 20-25 | 20-25 |
| Iwọn otutu ℃ | 35-40 | 35-40 |
| Akoko ipara s | 12±2 | 10±2 |
| Jeli akoko s | 70-90 | 50-70 |
| Tack free akoko s | 100-120 | 80-100 |
| Ọfẹ iwuwo kg/m3 | 24-26 | 24-26 |
Awọn iṣẹ foomu
| iwuwo m | GB/T 6343 | ≥35kg/m3 |
| Oṣuwọn sẹẹli pipade | GB/T 10799 | ≥92% |
| Ooru elekitiriki (15 ℃) | GB/T 3399 | ≤19 mW/(mK) |
| Agbara funmorawon | GB/T8813 | ≥150kPa |
| Iduroṣinṣin iwọn 24h -20 ℃ | GB/T8811 | ≤0.5% |
| 24h 100 ℃ | ≤1.0% |
Awọn data ti a pese loke jẹ iye aṣoju, eyiti o jẹ idanwo nipasẹ ile-iṣẹ wa.Fun awọn ọja ile-iṣẹ wa, data ti o wa ninu ofin ko ni awọn idiwọ kankan.
