Pu Mold Resin

Inkcazelo emfutshane:

Ineempawu ezigqwesileyo zokucwangcisa, ixesha elifutshane lejeli, liqinile kubushushu obuqhelekileyo.Imveliso egqityiweyo ineempawu ezintle zokumelana ne-abrasion, i-anti-hydrolyzing, i-transparence, ukuqina okulungileyo kunye nobukhulu obuzinzile.


Iinkcukacha zeMveliso

Iithegi zeMveliso

Pu Mold Resin

UHLELO

Inecandelo le-A&B, i-A yi-polyol, kunye ne-B yi-Iso-terinated polyurethane prepolymer.

IIMPAWU

Ineempawu ezigqwesileyo zokucwangcisa, ixesha elifutshane lejeli, liqinile kubushushu obuqhelekileyo.Imveliso egqityiweyo ineempawu ezintle zokumelana ne-abrasion, i-anti-hydrolyzing, i-transparence, ukuqina okulungileyo kunye nobukhulu obuzinzile.

ISICELO

Isetyenziselwa ukwenza isihlangu kunye neentlobo ezahlukeneyo zokubumba zePU.Indawo yerabha yeSilicon ukwenza ukubumba kwelitye lenkcubeko.

UKUGCINA

Gcina kwindawo epholileyo neyomileyo.Ukuba awukwazi ukusebenzisa igubu elinye phezulu ngexesha elinye, nceda ugcwalise igesi yeNitrojeni kwaye ulitywine kakuhle igubu.Ubomi beshelufu yokupakishwa kokuqala ziinyanga ezi-6.

IIPROPATI ZOMZIMBA

B

Uhlobo I-DM1295-B
Imbonakalo Ulwelo olungenambala okanye olutyheli olukhanyayo
Viscosity (30℃) mPa·s/ 1500±150

A

Uhlobo I-DM1260-A DM1270-A I-DM1280-A DM1290-A
Imbonakalo Ulwelo olumthubi olukhanyayo
Viscosity (30℃)/mPa·s 560±200 650±100 750±100 850±100
Umlinganiselo A:B (umlinganiselo wobunzima) 1.4:1 1.2:1 1:1 0.7:1
Ubushushu bokusebenza/℃ 25-40
Ixesha lejeli (30℃)*/min 6~15(iyaguquguquka)
Imbonakalo Ulwelo olumthubi olukhanyayo
Ubunzima (unxweme A) 60±2 70±2 80±2 90±2
Amandla okuqina/MPa 6 8 10 12
Ubude ngexesha lekhefu/ % 500 ~700
Amandla okukrazula/(kN/m) 25 30 40 40
Buyela kwakhona/ % 60 55 50 48
Umxhuzulane okhethekileyo (25℃) (g/cm3 1.07 1.08 1.10

1.11


  • Ngaphambili:
  • Okulandelayo:

  • Bhala umyalezo wakho apha kwaye uwuthumele kuthi