Princeps euismod Inov Polymeric Blended Blend Polyether Polyol
Special Series
INTRODUCTIO
Haec polyethorum series secundum singulas clientium necessitates ordinatur.Plerumque 2 vel 3 functiones sunt cum diversis ponderis hypotheticis ab 400 ad 5000.
APPLICANDIS
Late usus est ad elastomeros Polyurethane producendos, efficiens, sealant, tenaces.Spuma rigida etiam potest esse in systemate viscositas reducendi ratio.Quaedam eorum adhiberi possunt ad OCf et MS sealant.
ARTI SHEET DATA
Brand | Color (APHA) | OHV (mgKOH/g) | Viscositas (mPa.s/25℃) | H2O content! (%) | Acidum Pendo (mgKOH/g) | PH | K+ (mg/Kg) | Applicationem |
INOVOL S207H | ≤100 | 150-170 | 2300-3000 | ≤0.02 | ≤0.05 | 5.0-7.0 | - | Usus est pro elastomis polyurethanis, coatingis, OCF Styrofoam, stipticis, etc. |
INOVOL S210H | ≤50 | 107-116 | 1200-1600 | ≤0.02 | ≤0.05 | 5.0-7.0 | - | Usus est pro polyurethane elastomer, catena extensio agentis, polyurethane tenaces etc., ad meliorem duritiem, mechanicas proprietates et adhaesionem virium. |
INOVOL S215H | ≤50 | 72.0-76.0 | 800-1100 | ≤0.02 | ≤0.05 | 5.0-7.0 | - | Usus est pro elastomers polyurethane, adhaesiones, sealants, coatings, IMPERVIUS coatingis, corio slurry etc., ad emendandum adhaesionem. |
INOVOL S220H | ≤50 | 54.0-58.0 | 780-980 | ≤0.02 | ≤0.05 | 5.0-7.0 | - | Usus est pro elastomers polyurethane, adhaesiones, sealants, coatings, IMPERVIUS coatingis, corio slurry etc., ad emendandum adhaesionem. |
INOVOL S303A | ≤50 | 535-575 | 200-400 | ≤0.10 | ≤0.20 | 5.0-7.5 | ≤80 | Princeps polyether polyether activitas, usus pro agente polyurethane crosslinking. |
INOVOL S2000T | ≤50 | 53.0-59.0 | 1500-250 | ≤0.02 | ≤0.05 | 5.0-7.0 | - | Usus est ad spumas polyurethanas, adhaesiones aquarum fundatas, elastomeros, adhaesiones, etc. ad emendandas proprietates mechanicas, adhaesionem, resistentiam tempestatis. |
INOVOL S2500T | ≤200 | 42.5-47.5 | 1000-1800 | ≤0.02 | ≤0.05 | 5.0-7.0 | - | Usus est ad spumas polyurethanas, adhaesiones aquarum fundatas, elastomeros, adhaesiones, etc. ad emendandas proprietates mechanicas, adhaesionem, resistentiam tempestatis. |
INOVOL S5000T | ≤50 | 32.0-36.0 | 1100-1500 | ≤0.08 | ≤0.08 | 5.0-7.5 | ≤5 | Spuma agentis ad altam mollitiam despumat ad emendare facultatem apertam spumae et reducere spumam DECREMENTUM |
INOVOL S25K | ≤30 | 22.5-27.5 | 2000-2400 | ≤0.08 | ≤0.08 | 5.0-7.5 | ≤5 | Spuma agentis ad altam mollitiam despumat ad emendare facultatem apertam spumae et reducere spumam DECREMENTUM |
INOVOL S350T | ≤50 | 32.0-36.0 | 1100-1500 | ≤0.08 | ≤0.08 | 5.0-7.5 | ≤5 | Spuma agentis ad altam mollitiam despumat ad emendare facultatem apertam spumae et reducere spumam DECREMENTUM |
INOVOL S01X | ≤50 | 54.0-58.0 | 400-700 | ≤0.05 | ≤0.05 | 5.0-7.0 | - | Usus est ut defoamer |