Fim na tushen Polyester TPU-Hotmelt
Hardness: Shore A 70 - Shore A 97
Halaye: Kyakkyawan mannewa zuwa TPU, nailan, PVC, zane, fata da sauran kayan, kuma bayan haɗin gwiwa, yana da halaye na ƙarfin haɗin gwiwa, babban ƙarfi, juriya da haɓaka mai kyau.
Aikace-aikace: Calendered fim, Milled foda, m film, masana'anta lamination, Shoe kayan, Seam sealing kaset da dai sauransu.
|
Abubuwa |
Tauri | Ƙarfin Ƙarfin Ƙarfi |
Sbatu akai-akai |
MeltFƙanananRci | LaminatingTdaular | Tack Free Time |
| Daidaitawa | Saukewa: ASTM D2240 | Saukewa: ASTM D412 | Saukewa: ASTM D36 | Saukewa: ASTM D1238 | Hanyar INOV | Hanyar INOV |
|
Naúrar | Shore A | MPa | ℃ | g/10 min | ℃ | min |
| T5160 | 97 | 18 | 75 | 33-36 | 70-80 | 3 |
| T5260 | 97 | 20 | 80 | 16-18 | 75-85 | 3.5 |
| T5260H | 97 | 23 | 85 | 11-13 | 80-90 | 4 |
| T6195 | 97 | 25 | 130 | 20-25 | 110-140 | 10 |
| T6185 | 97 | 28 | 140 | 15-20 | 120-150 | 12 |
|
Abubuwa |
Tauri | Ƙarfin Ƙarfin Ƙarfi | Tsawaitawa |
Flow FarawaTdaular |
Sbatu akai-akai | LaminatingTdaular |
| Daidaitawa | Saukewa: ASTM D2240 | Saukewa: ASTM D412 | Saukewa: ASTM D412 | Hanyar INOV | Saukewa: ASTM D36 | Hanyar INOV |
|
Naúrar | Shore A | MPa | % | ℃ | ℃ | ℃ |
| B480 | 81 | 16 | 800 | 95 | 115 | 120-140 |
| B485 | 85 | 18 | 950 | 103 | 125 | 130-150 |
| T5170 | 72 | 18 | 850 | 105 | 126 | 130-150 |
| Saukewa: T5170-1 | 72 | 18 | 850 | 105 | 126 | 100-150 |
| T5175 | 77 | 19 | 800 | 113 | 133 | 140-160 |
| Saukewa: T5175-1 | 77 | 19 | 800 | 113 | 133 | 110-160 |
| Saukewa: T5185-10 | 82 | 24 | 850 | 122 | 146 | 140-160 |
| T5185-9 | 82 | 24 | 850 | 122 | 146 | 120-170 |
| T5190 | 91 | 19 | 750 | 115 | 133 | 140-160 |
