I-MS-930 Silicon Modified sealant

Incazelo emfushane:

I-MS-930 iwukusebenza okuphezulu, i-neutral single-component sealant esekelwe ku-MS polymer.Ithintana namanzi ukuze yakhe into enwebekayo, futhi isikhathi sayo samahhala nesikhathi sokuphulukisa kuhlobene nezinga lokushisa kanye nomswakama.Ukwenyuka kwezinga lokushisa kanye nomswakama kunganciphisa i-tack. isikhathi samahhala nesikhathi sokuphulukisa, kuyilapho izinga lokushisa eliphansi kanye nomswakama ophansi nakho kungabambezela le nqubo.


Imininingwane Yomkhiqizo

Omaka bomkhiqizo

I-MS-930 Silicon Modified sealant

ISINGENISO

I-MS-930 iwukusebenza okuphezulu, i-neutral single-component sealant esekelwe ku-MS polymer.Ithintana namanzi ukuze yakhe into enwebekayo, futhi isikhathi sayo samahhala nesikhathi sokuphulukisa kuhlobene nezinga lokushisa kanye nomswakama.Ukwenyuka kwezinga lokushisa kanye nomswakama kunganciphisa i-tack. isikhathi samahhala nesikhathi sokuphulukisa, kuyilapho izinga lokushisa eliphansi kanye nomswakama ophansi nakho kungabambezela le nqubo.

I-MS-930 inokusebenza okuphelele kwe-elastic seal kanye ne-adhesion.Ilungele izingxenye ezidinga ukubekwa uphawu okunwebekayo ngaphezu kwamandla athile okunamathela.

I-MS-930 ayinaphunga, ayinaso i-solvent, i-isocyanate ayinayo futhi ayinayo i-PVC .Inokunamathela okuhle ezintweni eziningi futhi ayidingi i-primer, ebuye ifanelekele indawo ependwe nge-spray.Lo mkhiqizo ufakazelwe ukuthi unokumelana okuhle kakhulu kwe-UV , ngakho-ke ingasetshenziswa kokubili ngaphakathi nangaphandle.

IZICI

A) Ayikho i-formaldehyde, ayikho i-solvent, ayikho iphunga elingavamile

B) Awekho uwoyela we-silicone, akukho ukugqwala futhi akukho ukungcoliswa kwe-substrate, evumelana nemvelo

C) Ukunamathela okuhle kwezinto ezihlukahlukene ngaphandle kwe-primer

D) Impahla enhle yemishini

E) Umbala ozinzile, ukumelana okuhle kwe-UV

F) Ingxenye eyodwa, kulula ukwakha

G) Ingapendwa

ISICELO

Ukukhiqizwa kwemboni, njengokuhlanganisa izimoto, ukukhiqizwa kwemikhumbi, ukukhiqiza umzimba wesitimela, isakhiwo sensimbi yesitsha.

I-Ms-930 inokunamathela okuhle ezintweni eziningi: njenge-aluminium (epholishiwe, e-anodized), ithusi, insimbi, insimbi engagqwali, ingilazi, i-ABS, i-PVC eqinile kanye nezinto eziningi ze-thermoplastic.I-ejenti yokukhulula ifilimu epulasitiki kufanele isuswe ngaphambi kokunamathela.

Inothi elibalulekile: I-PE, PP, PTFE ayinamathele ku-relay, into eshiwo ngenhla ayinconywa ukuthi ihlolwe kuqala.

Indawo engaphambi kokwelashwa kufanele ihlanzeke, yome futhi ingabi namafutha.

INDEX YOBUCHWEPHESHE 

Umbala

Mhlophe/Mnyama/Mpunga

Iphunga

N/A

Isimo

Thixotropy

Ukuminyana

1.49g/cm3

Okuqukethwe okuqinile

100%

Indlela yokwelapha

Ukwelapha umswakama

Isikhathi esomile ebusweni

≤ 30min*

Izinga lokuphulukisa

4mm/24h*

Amandla aqinile

≥3.0 MPa

Ukwelula

≥ 150%

Izinga lokushisa lokusebenza

-40 ℃ kuya ku-100 ℃

* Izimo ezijwayelekile: izinga lokushisa 23 + 2 ℃, Umswakama ohlobene 50±5%

INDLELA YOKUSEBENZISA

Isibhamu esihambelanayo semanuwali noma se-pneumatic glue kufanele sisetshenziselwe ukupakisha okuthambile, futhi kunconywa ukuthi ulawule ngaphakathi kwe-0.2-0.4mpa lapho kusetshenziswa isibhamu se-pneumatic glue.Ukushisa okuphansi kakhulu kuzoholela ekwandeni kwe-viscosity, kunconywa ukuba ushise ama-sealants ekamelweni lokushisa ngaphambi kokufaka isicelo.

UKUSEBENZA KWE-COATING

I-Ms-930 ingapendiwa, nokho-ke, ukuhlolwa kokuvumelana nezimo kuyanconywa kumapende anhlobonhlobo.

ISITOREJI

Ukushisa kwesitoreji: 5 ℃ kuya ku-30 ​​℃

Isikhathi sokugcina: Izinyanga eziyisi-9 ephaketheni lokuqala.


  • Okwedlule:
  • Olandelayo:

  • Bhala umyalezo wakho lapha futhi usithumelele wona