I-Donpanel 423 CP/IP base blend polyols ye-PIR eqhubekayo
I-Donpanel 423 CP/IP base blend polyols ye-PIR eqhubekayo
ISINGENISO
Uhlelo lweDonPanel 423 luwuhlelo lwezingxenye ezine oluhlanganisa i-polyols ehlanganisiwe, i-polymeric MDI, i-catalyst kanye ne-ejenti evuthelayo (uchungechunge lwe-pentane).Igwebu linendawo enhle yokuvikela ukushisa, isisindo esilula, amandla okucindezela aphezulu kanye ne-flame retardant nezinye izinzuzo.Isetshenziswa kabanzi ukukhiqiza amapaneli e-sandwich aqhubekayo, amaphaneli kathayela njll, okusebenza ukwenza izitolo ezibandayo, amakhabethe, izindawo zokukhosela eziphathwayo nokunye.
IMPAHLA YOMNYAMA
K1-blend polyols DonPanel 423
| Ukubukeka | Uketshezi olukhanyayo oluphuzi kuya kokunsundu |
| OHvalue mgKOH/g | 260-300 |
| I-viscosity enamandla (25℃) mPa.S | 1800-2200 |
| Ukuminyana (20℃) g/ml | 1.10-1.16 |
| Izinga lokushisa lesitoreji ℃ | 10-25 |
| Inyanga yokuzinza kwesitoreji | 6 |
I-K2-Polymeric MDI DD-44V80
| Ukubukeka | uketshezi olukhanyayo olunsundu |
| Okuqukethwe kwe-NCO % | 30.50 |
| I-viscosity enamandla (25℃) mPa.S | 600-700 |
| Ukuminyana (20℃) g/ml | 1.24 |
| Izinga lokushisa lesitoreji ℃ | 10-25 |
| Inyanga yokuzinza kwesitoreji | 12 |
I-K3-Cat 2816
| Ukubukeka | Uketshezi olukhanyayo oluphuzi olukhanyayo |
| I-viscosity enamandla (25℃) mPa.S | 1200-1600 |
| Ukuminyana (20℃) g/ml | 0.96 |
| Izinga lokushisa lesitoreji ℃ | 10-25 |
| Inyanga yokuzinza kwesitoreji | 6 |
ISILINGANISO ESINCONYWAYO
| Ama-Raw material | pbw |
| I-DonPanel 423 | 100 g |
| Ikati2816 | 1-3 g |
| I-Pentane (Cyclopentane/Isopentane) | 7-10 g |
| I-Polymeric MDI DD-44V80 | 135-155 g |
UBUCHWEPHESHE KANYE NE-REACTIVITY(inani eliqondile liyahlukahluka kuye ngezimo zokucubungula)
| Izinto | Ukuxuba ngezandla | Umshini wokucindezela okuphezulu |
| Izinga lokushisa lempahla eluhlaza ℃ | 20-25 | 20-25 |
| Izinga lokushisa lesikhunta ℃ | 45-55 | 45-55 |
| Isikhathi sokhilimu s | 10-15 | 6-10 |
| Isikhathi se-gel s | 40-60 | 40-60 |
| Ukuminyana kwamahhala kg/m3 | 34.0-36.0 | 33.0-35.0 |
IMISEBENZI YEFOMU YEMACHINERY
| Ukuminyana kwesikhunta | ISO 845 | ≥38kg/m3 |
| Izinga leseli elivaliwe | I-ASTM D 2856 | ≥90% |
| I-Thermal conductivity (15℃) | I-EN 12667 | ≤24mW/(mK) |
| Amandla okucindezela | EN 826 | ≥120kPa |
| Amandla okunamathela | I-GB/T 16777 | ≥100kPa |
| Ukuzinza kwe-Dimensional 24h -30℃ | ISO 2796 | ≤0.5% |
| 24h -100℃ | ≤1.0% | |
| Ibanga le-flame retardant | I-DIN 4102 | Ileveli B2 (akukho ukushiswa) |
| Isilinganiso sokumuncwa kwamanzi | I-GB 8810 | ≤3% |
Idatha enikezwe ngenhla yinani elijwayelekile, elivivinywa inkampani yethu.Ngemikhiqizo yenkampani yethu, idatha efakwe emthethweni ayinazo izithiyo.
Izigaba zemikhiqizo
-
Donfoam 813 CP/IP base blend polyols for block ...
-
Donpanel 423PIR CP/IP base blend polyols for c...
-
Ukusebenza Okuphezulu kwe-Inov Polymeric Blend P...
-
Donpanel 412 HCFC-141b base blend polyols for PUR
-
Donfoam 812 HCFC-141B base blend polyols for bl...
-
I-Doncool 104M HFC-245fa/CP ingxube ye-polyols eyisisekelo