poliesita-orisun TPU-Hotmelt Film
Lile: Shore A 70 – Shore A 97
Awọn abuda: Adhesion ti o dara si TPU, ọra, PVC, aṣọ, alawọ ati awọn ohun elo miiran, ati lẹhin ifarapọ, o ni awọn abuda ti agbara ifunmọ giga, ti o ga julọ, wiwọ resistance ati rirọ to dara.
Awọn ohun elo: Fiimu Calendered, Milled powder, Transparent film, lamination fabric, Bata ohun elo, Seam sealing awọn teepu ati be be lo.
|
Awọn nkan |
Lile | Agbara fifẹ |
Sigba igba |
MeltFkekereRjẹun | LaminatingTemperature | Tack Free Time |
| Standard | ASTM D2240 | ASTM D412 | ASTM D36 | ASTM D1238 | Ọna INOV | Ọna INOV |
|
Ẹyọ | Etikun A | MPa | ℃ | g/10 iseju | ℃ | min |
| T5160 | 97 | 18 | 75 | 33-36 | 70-80 | 3 |
| T5260 | 97 | 20 | 80 | 16-18 | 75-85 | 3.5 |
| T5260H | 97 | 23 | 85 | 11-13 | 80-90 | 4 |
| T6195 | 97 | 25 | 130 | 20-25 | 110-140 | 10 |
| T6185 | 97 | 28 | 140 | 15-20 | 120-150 | 12 |
|
Awọn nkan |
Lile | Agbara fifẹ | Ilọsiwaju |
Fkekere IbẹrẹTemperature |
Sigba igba | LaminatingTemperature |
| Standard | ASTM D2240 | ASTM D412 | ASTM D412 | Ọna INOV | ASTM D36 | Ọna INOV |
|
Ẹyọ | Etikun A | MPa | % | ℃ | ℃ | ℃ |
| B480 | 81 | 16 | 800 | 95 | 115 | 120-140 |
| B485 | 85 | 18 | 950 | 103 | 125 | 130-150 |
| T5170 | 72 | 18 | 850 | 105 | 126 | 130-150 |
| T5170-1 | 72 | 18 | 850 | 105 | 126 | 100-150 |
| T5175 | 77 | 19 | 800 | 113 | 133 | 140-160 |
| T5175-1 | 77 | 19 | 800 | 113 | 133 | 110-160 |
| T5185-10 | 82 | 24 | 850 | 122 | 146 | 140-160 |
| T5185-9 | 82 | 24 | 850 | 122 | 146 | 120-170 |
| T5190 | 91 | 19 | 750 | 115 | 133 | 140-160 |
