Wholesale Price Low Hardness Pu Gel Material - DSPU-601 – INOV
Wholesale Price Low Hardness Pu Gel Material - DSPU-601 – INOV Detail:
DSPU-601
INTRODUCTION
DSPU-601 is two-component polyurea spray type combination, which is used in a variety of base material protection. 100% solid content, no solvents, no volatile, little or no odor, strictly comply with the VOC limit standard, belongs to the environmentally friendly materials.
PHYSICAL PROPERTIES
| Item | Unit | Polyether component | Isocyanate component |
| Appearance | viscous liquid | viscous liquid | |
| Density（20℃） | g/cm3 | 1.02±0.03 | 1.08±0.03 |
| Dynamic Viscosity（25℃） | mPa·s | 650±100 | 800±200 |
| shelf life | month | 6 | 6 |
| Storage Temperature | ℃ | 20-30 | 20-30 |
PRODUCT PACKAGING
200kg /drum
STORAGE
B component (isocyanate) is moisture sensitive. Unused raw materials should be stored in a sealed drum, avoid moisture intrusion .A component (polyether) should stir well before use.
PACKAGING
DTPU-401 is sealed in 20kg or 22.5kg pails and transported in wooden cases.
POTENTIAL HAZARDS
Part B (isocyanates) stimulate the eye, respiratory and skin through breathing and skin contact, and possibly sensitization.
When contact part B ( isocyanates), necessary preventive measures should be taken according to material safety date sheet (MSDS).
WASTE DISPOSAL
With reference to the material safety date sheet (MSDS) of the product, or deal with it in accordance with local laws and regulations.
PROPOSAL OF PROCESS
| Unit | Value | Test Methods | |
| Mix ratio | By volume | 1:1(A:B) | |
| GT | s | 5-10 | GB/T 23446 |
| Surface dry time | s | 15-25 | |
| Temperature of material
-part A -part B |
℃ | 65-70 | |
| Pressure of material
-Part A -Part B |
PSI | 2500 |
PHYSICAL PROPERTIES OF FINISHED PRODUCT
| DSPU-601 | Unit | Test Methods | |
| Hardness | ≥80 | Shore A | GB/T 531.1 |
| Tensile Strength | ≥16 | MPa | GB/T 16777 |
| Elongation at break | ≥450 | % | |
| Tear strength | ≥50 | N/mm | GB/T 529 |
| impervious | ℃ | GB/T 16777 | |
| Bibulous rate | ≤5 | % | GB/T 23446 |
| solid content | 100 | % | GB/T 16777 |
| Adhesive strength, dry base material | ≥2 | Mpa |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
The pretty loaded projects management experiences and one to a person support model make the high importance of business enterprise communication and our easy understanding of your expectations for Wholesale Price Low Hardness Pu Gel Material - DSPU-601 – INOV , The product will supply to all over the world, such as: Costa rica, El Salvador, Houston, During in 11 years, We have participated in more than 20 exhibitions, obtains the highest praise from each customer. Our company has been devoting that "customer first" and committed to helping customers expand their business, so that they become the Big Boss !
By Fanny from Boston - 2018.05.22 12:13
This company has a lot of ready-made options to choose and also could custom new program according to our demand, which is very nice to meet our needs.
By Dawn from Myanmar - 2017.03.28 16:34
