Wholesale ODM Competitive Price Building Material PU Foam Spray Insulation ISO Mdi and Polyurethane Blend Polyol
The key to our success is “Good Product Excellent, Reasonable Rate and Efficient Service” for Wholesale ODM Competitive Price Building Material PU Foam Spray Insulation ISO Mdi and Polyurethane Blend Polyol, We’ve been self-confident that there will be considered a promising upcoming and we hope we could have long term cooperation with prospects from all over the environment.
The key to our success is “Good Product Excellent, Reasonable Rate and Efficient Service” for China Chemical and Building Material, Based on products with high quality, competitive price, and our full range service, we have accumulated specialist strength and experience, and we have built up a very good reputation in the field. Along with the continuous development, we commit ourselves not only to the Chinese domestic business but also the international market. May you moved by our high quality products and passionate service. Let’s open a new chapter of mutual benefit and double win.
Doncool 102 HCFC-141B base blend polyols
INTRODUCTION
DonCool 102 is blend polyols, uses the HCFC-141B as blowing agent, which is the substitution of CFC-11 in polyurethane industry, it applies to refrigerators, icebox and other thermal insulation products, the characteristics are as follows,
1. Excellent flow ability, foam density distributes uniformity, low thermal conductivity
2. Excellent low temperature dimension stability and cohesiveness
3. Demould time 6~8 minutes
PHYSICAL PROPERTY
Appearance |
Pale yellow transparent liquid |
Hydroxyl value mgKOH/g |
300-360 |
Dynamic viscosity(25℃) mPa.S |
250-500 |
Specific gravity (20℃) g/ml |
1.10-1.15 |
Storage temperature ℃ |
10-25 |
Pot life Month |
6 |
RECOMMENDED RATIO
|
pbw |
Doncool 102 |
100 |
POL: ISO |
1.0:1.1 |
TECHNOLOGY AND REACTIVITY (the actual value varied as per process conditions)
Manual mixing |
High pressure machine |
|
Material Temperature ℃ |
20-25 |
20-25 |
Mould Temperature ℃ |
35-40 |
35-40 |
Cream time s |
12±2 |
10±2 |
Gel time s |
70-90 |
50-70 |
Tack free time s |
100-120 |
80-100 |
Free density kg/m3 |
24-26 |
24-26 |
FOAM PERFORMANCES
Mold density | GB/T 6343 | ≥35kg/m3 |
Closed-cell rate | GB/T 10799 |
≥92% |
Thermal conductivity (15℃) | GB/T 3399 | ≤19 mW/(m.K) |
Compression strength | GB/T8813 | ≥150kPa |
Dimensional stability 24h -20℃ | GB/T8811 |
≤0.5% |
24h 100℃ |
≤1.0% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.