China Wholesale Mattress And Sofa Foam System - DTPU-401 – INOV Manufacturer and Supplier

Wholesale Mattress And Sofa Foam System - DTPU-401 – INOV

Short Description:

Product Detail

Product Tags

Feedback (2)

It adheres on the tenet "Honest, industrious, enterprising, innovative" to develop new items frequently. It regards buyers, success as its very own success. Let us produce prosperous future hand in hand for Pu Track, Adhesive Film, Integral Skin Foam System, Since the factory founded, we have committed to the development of new products. With the social and economic pace, we will continue to carry forward the spirit of "high quality, efficiency, innovation, integrity", and stick to the operating principle of "credit first, customer first, quality excellent". We will create a brilliant future in hair production with our partners.

Wholesale Mattress And Sofa Foam System - DTPU-401 – INOV Detail:

DOPU-201 Eco-friendly Hydrophobic Polyurethane Grouting Material

INTRODUCTION

DTPU-401 is a one component polyurethane coating with isocyanate, polyether polyol as main raw materials, moisture-curing polyurethane waterproof coating.

Especially used for horizontal plane. When this coating is applied on surface substrate, it has chemical reaction with the moisture in the air, and then it will form a seamless elastomeric rubber waterproof membrane.

APPLICATION

● Undergrounds;

● Parking garages;

● Subways in open cut method;

● Channels;

● Kitchen or bathroom;

● Floors, balcony and unexposed roofs;

● Swimming pools, man-made fountain and other pools;

● Top plate at plazas.

ADVANTAGES

● Good tensile strength and elongation;

● Both high and low temperature resistance;

● Strong adhesive;

● Seamless, no pinholes and bubbles;

● Resistance to long-term water erosion;

● Corrosion-resisting and mould-resisting;

● Convenient to apply.

TYPICAL PROPERTIES

Item	Requirement	Test Method
Hardness	≥50	ASTM D 2240
Weight Loss	≤20%	ASTM C 1250
Low temperature crack bridging	No cracking	ASTM C 1305
Film thickness(vertical surface)	1.5mm±0.1mm	ASTM C 836
Tensile strength /MPa	2.8	GB/T 19250-2013
Elongation at break /%	700	GB/T 19250-2013
Tear strength /kN/m	16.5	GB/T 19250-2013
Stability	≥6 months	GB/T 19250-2013

PACKAGING

DTPU-401 is sealed in 20kg or 22.5kg pails and transported in wooden cases.

STORAGE

DTPU-401 material should be stored by sealed pails at dry and well-ventilated places and protected from sun or rain. The temperature in stored places can not be higher than 40° C. It can not be closed to fire sources. The normal shelf life is 6 months.

TRANSPORTATION

DTPU-401 is needed to be avoided sunshine and rain. Fire sources are forbidden during transportation.

CONSTRUCTIVE SYSTEM

The system is basically consisted of substrate, additional layer, waterproof coated membrane and protection layer.

COVERAGE

1.7kg per m2 gives dft 1mm minimum. Coverage may vary with the substrate condition during application.

SURFACE PREPARATION

Surfaces should be dry, stable, clean, smooth, without pockmarks or honeycombs and free from any dusts, oil or loose particles. Cracks and surface irregularities need to be filled by sealants and do additional waterproofing. For smooth and stable surfaces, this step can be skipped.

Product detail pictures:

Related Product Guide:

We usually think and practice corresponding for the change of circumstance, and grow up. We aim at the achievement of a richer mind and body as well as the living for Wholesale Mattress And Sofa Foam System - DTPU-401 – INOV , The product will supply to all over the world, such as: Tunisia, Chicago, Serbia, We only supply quality items and we believe this is the only way to keep business continue. We can supply custom service too such as Logo, custom size, or custom merchandise etc that can according to customer's requirement.

Casting Pu Shoe Mould Resin