Filimi e thehiloeng ho polyester ea TPU-Hotmelt
Thata: Shore A 70 - Shore A 97
Litšobotsi: Ho khomarela hantle ho TPU, nylon, PVC, lesela, letlalo le lisebelisoa tse ling, 'me ka mor'a ho tlamahane, e na le litšobotsi tsa matla a holimo a tlamahano, boima bo phahameng, ho hanyetsa ho apara le elasticity e ntle.
Likopo: Filimi e kentsoeng ka khalendara, phofo ea Milled, Filimi e pepeneneng, lamination ea masela, lisebelisoa tsa lieta, litheipi tse tiisang seam jj.
|
Lintho |
Ho thatafala | Matla a tšepe |
Shangata ntlha |
MeltFtlaseRjele | LaminatingTEmperature | Nka nako ea mahala |
| Standard | ASTM D2240 | ASTM D412 | ASTM D36 | ASTM D1238 | Mokhoa oa INOV | Mokhoa oa INOV |
|
Yuniti | Shore A | MPa | ℃ | g/10 mets | ℃ | min |
| T5160 | 97 | 18 | 75 | 33-36 | 70-80 | 3 |
| T5260 | 97 | 20 | 80 | 16-18 | 75-85 | 3.5 |
| T5260H | 97 | 23 | 85 | 11-13 | 80-90 | 4 |
| T6195 | 97 | 25 | 130 | 20-25 | 110-140 | 10 |
| T6185 | 97 | 28 | 140 | 15-20 | 120-150 | 12 |
|
Lintho |
Ho thatafala | Matla a tšepe | Elongation |
Ftlase QaloTEmperature |
Shangata ntlha | LaminatingTEmperature |
| Standard | ASTM D2240 | ASTM D412 | ASTM D412 | Mokhoa oa INOV | ASTM D36 | Mokhoa oa INOV |
|
Yuniti | Shore A | MPa | % | ℃ | ℃ | ℃ |
| B480 | 81 | 16 | 800 | 95 | 115 | 120-140 |
| B485 | 85 | 18 | 950 | 103 | 125 | 130-150 |
| T5170 | 72 | 18 | 850 | 105 | 126 | 130-150 |
| T5170-1 | 72 | 18 | 850 | 105 | 126 | 100-150 |
| T5175 | 77 | 19 | 800 | 113 | 133 | 140-160 |
| T5175-1 | 77 | 19 | 800 | 113 | 133 | 110-160 |
| T5185-10 | 82 | 24 | 850 | 122 | 146 | 140-160 |
| T5185-9 | 82 | 24 | 850 | 122 | 146 | 120-170 |
| T5190 | 91 | 19 | 750 | 115 | 133 | 140-160 |
