Inov Polyurethane Foam Zvigadzirwa zveKugadzirwa kweFoam Insoles
Pu Foam Insole System
ISUMO
PU foam insole system ndeye polyether yakavakirwa zvinhu, iri kushandiswa kugadzira inochinjika polyurethane tsoka mibhedha uye masokisi liner.Zvinhu zvekupedzisira zvinonakidzwa nezvinhu zvakanaka zvemuviri uye kusimba kwakanaka.Iyo insole density uye kuoma kunogadziriswa.
ZVINHU ZVINHU
| Type | DXD-01A | DXD-01B |
| Chitarisiko | Milky white viscous fluid | Mvura isina ruvara kana chiedza yeyero. |
| Mix ratio (kuburikidza nehuremu) | 100 | 55~60 |
| Tembiricha yezvinhu (℃) | 35~40 | 35~40 |
| Mold tembiricha (℃) | 50~55 | |
| Cream nguva (s) | 16~18 | |
| Nguva dzekusimuka | 22~24 | |
| Nguva yegel | 120~140 | |
| Yemahara kusimuka furo density (g/cm3) | 0.15~0.2 | |
| Demould nguva (min) | 3 | |
| Kuwanda kwechigadzirwa (g/cm3) | 0.2~0.3 | |
| Kuoma (Shore C) | 30~40 | |
| Kusimba simba (MPa) | 0.45-0.50 | |
| Simba rekubvarura (KN/m) | 2.50-2.60 | |
| Elongation(%) | 280-300 | |
Nyora meseji yako pano uye titumire kwatiri
