Polyurethane mold glue
Kuita kwakanaka kwemaitiro, kunogona kurapwa pakamuri tembiricha, nguva pfupi yekudhiza, uye ruvara runogona kuwedzerwa kugadzirisa ruvara.Iyo rabha yakapedzwa ine kumira kwakanaka kwekupfeka, kuramba kwemvura, kujeka, kunaka kwakanaka uye saizi yakagadzikana.
Inogona kutsiva silicon rabha kugadzirwa "tsika dombo" mold.Inogona zvakare kushandiswa kugadzira magetsi emidziyo yemagetsi, rabha roller, ndiro yerabha, vhiri rerabha uye shangu mold nezvimwe zvigadzirwa.
Chikamu B | model | DM1295-B | |||
chitarisiko | Mvura isina ruvara kusvika kuyero inoonekera | ||||
viscosity (30℃) mPa·s/ | 1500±150 | ||||
Chikamu A | model | DM1260-A | DM1270-A | DM1280-A | DM1290-A |
chitarisiko | Mvura yakatsvuka yero | ||||
(30℃)/mPa·s | 560±200 | 650±100 | 750±100 | 850±100 | |
Chiyero A: B (mhando) | 1.4:1 | 1.2:1 | 1:1 | 0.7:1 | |
Kushanda tembiricha / ℃ | 25~40 | ||||
Nguva yegel (30 ℃)*/min | 6~15 (Inochinjika) | ||||
chitarisiko | Light yellow elastomer | ||||
Kuoma (mahombekombe A) | 60±2 | 70±2 | 80±2 | 90±2 | |
tensile simba /MPa | 6 | 8 | 10 | 12 | |
Elongation / % | 500~700 | ||||
kubvarura simba / (kN/m) | 25 | 30 | 40 | 40 | |
Rebound / % | 60 | 55 | 50 | 48 | |
Density/(g/cm3) | 1.07 | 1.08 | 1.10 | 1.11 |
Nyora meseji yako pano ugotitumira