Inov Polyurethane Mould Adhesive Products for Production Moulds
PU mould glue system
CHARACTERISTICS
Substitute for Silicon rubber to make the mould of “cultural stone”. Excellent processing properties, cold cured, shorter gel time, and regulating colours by adding pigment. Specially used into shoe mould.
Good abrasive resistance, hydrolysis resistance, transparent, good resilience, stable dimension for finish products.
SPECIFICATION
| B | Type | DM1295-B | DM1260-B | DM1360-B | |||
| Appearance | Colorless or light yellow transparent liquid | ||||||
| Viscosity（30℃）mPa·s/ | 670±150 | 1050±150 | |||||
| A | Type | DM1260-A | DM1270-A | DM1280-A | DM1290-A | DM1250-A | DM1340-A |
| Appearance | Light yellow liquid | ||||||
| Viscosity（30℃）/mPa·s | 1700±200 | 3600±200 | 1300±200 | ||||
|
Ratio A：B（mass ratio） |
1.4:1 |
1.2:1 |
1:1 |
0.7:1 |
1:1 |
1:0.6 |
|
|
Operation temperature/℃ |
25～40 |
||||||
|
Gel time（30℃）*/min |
13~14 |
13~14 |
6~8 |
6~7 |
15~16 |
16~17 |
|
|
Appearance |
Light yellow liquid |
||||||
|
Hardness （shore A） |
60±3 |
70±2 |
80±2 |
90±2 |
50±3 |
40±3 |
|
AUTOMATIC CONTROL
The production is controlled by DCS system, and packing by automatic filling machine. Package is 200KG/DRUM Or 20KG/DRUM.
Write your message here and send it to us
