Professional China Low Hardness Polyurethane System - Doncool 103 CP/IP base blend polyols – INOV
Professional China Low Hardness Polyurethane System - Doncool 103 CP/IP base blend polyols – INOV Detail:
Doncool 103 CP/IP base blend polyols
INTRODUCTION
Doncool 103 is blend polyols uses CP or CP/IP as blowing agent, which applies to refrigerators, freezers, and other insulation products. The characteristics of the products are as follows
1. Excellent flow ability, the density of the foam is well-distributed, and the thermal conductivity is low
2. Excellent low-temperature dimensional stability and good cohesiveness;
3. Demoulding time is 6-8 minutes.
PHYSICAL PROPERTY
| Appearance |
Pale yellow transparent liquid |
| Hydroxyl value mgKOH/g |
360-420 |
| Dynamic viscosity（25℃） mPa.S |
3000-4000 |
| Specific gravity (20℃) g/ml |
1.06-1.08 |
| Storage temperature ℃ |
10-25 |
| Pot life Month |
6 |
RECOMMENDED RATIO
|
|
pbw |
|
Doncool 102 |
100 |
| CP or CP/IP |
12-14 |
| Isocyanate |
136-142 |
TECHNOLOGY AND REACTIVITY (the actual value varied as per process conditions)
|
|
Manual mixing |
High pressure machine |
| Material Temperature ℃ |
20-25 |
20-25 |
| Mould Temperature ℃ |
35-40 |
35-40 |
| Cream time s |
12-16 |
8-12 |
| Gel time s |
75-85 |
50-70 |
| Tack free time s |
100-120 |
70-100 |
| Free density kg/m3 |
25-26 |
24-25 |
FOAM PERFORMANCES
| Mold density | GB/T 6343 | ≥35kg/m3 |
| Closed-cell rate | GB/T 10799 |
≥90% |
| Thermal conductivity （15℃） | GB/T 3399 | ≤22 mW/(m.K) |
| Compression strength | GB/T8813 | ≥150kPa |
| Dimensional stability 24h -20℃ | GB/T8811 |
≤0.5% |
|
24h 100℃ |
≤1.0% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
With a positive and progressive attitude to customer's interest, our enterprise continually improves our products excellent to meet the wants of customers and further focuses on safety, reliability, environmental requirements, and innovation of Professional China Low Hardness Polyurethane System - Doncool 103 CP/IP base blend polyols – INOV , The product will supply to all over the world, such as: Puerto Rico, Sri Lanka, California, We look forward to hearing from you, whether you are a returning customer or a new one. We hope you will find what you are looking for here, if not, please contact us immediately. We pride ourselves on top notch customer service and response. Thank you for your business and support!
By Elaine from European - 2017.09.29 11:19
We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
By Roland Jacka from India - 2018.03.03 13:09
