PriceList for Seat Cushion - Pu Mould Resin – INOV
PriceList for Seat Cushion - Pu Mould Resin – INOV Detail:
Pu Mould Resin
COMPOSITION
It consists of A&B component, A is polyol, and B is Iso-terminated polyurethane prepolymer.
CHARACTERISTICS
It has excellent processing properties, short gel time, solid in common temperature. The finished product has good properties of abrasion resistance, anti-hydrolyzing, transparence, good resilience and stable dimension.
APPLICATION
Used for making shoe and different kind of PU moulds. Substitute of Silicon rubber to make the mould of cultural stone.
STORAGE
Store in a cool and dry place. If you can’t use one drum up at one time, please fill Nitrogen gas and seal the drum well. The shelf life of original packing is 6 months.
PHYSICAL PROPERTIES
|
B |
Type | DM1295-B | |||
| Appearance | Colorless or light yellow transparent liquid | ||||
| Viscosity（30℃）mPa·s/ | 1500±150 | ||||
|
A |
Type | DM1260-A | DM1270-A | DM1280-A | DM1290-A |
| Appearance | Light yellow liquid | ||||
| Viscosity（30℃）/mPa·s | 560±200 | 650±100 | 750±100 | 850±100 | |
| Ratio A：B（mass ratio） | 1.4:1 | 1.2:1 | 1:1 | 0.7:1 | |
| Operation temperature/℃ | 25～40 | ||||
| Gel time（30℃）*/min | 6～15（variable） | ||||
| Appearance | Light yellow liquid | ||||
| Hardness （shore A） | 60±2 | 70±2 | 80±2 | 90±2 | |
| Tensile strength/MPa | 6 | 8 | 10 | 12 | |
| Elongation at break/ % | 500～700 | ||||
| Tear strength/（kN/m） | 25 | 30 | 40 | 40 | |
| Rebound/ % | 60 | 55 | 50 | 48 | |
| Specific gravity（25℃）（g/ cm3） | 1.07 | 1.08 | 1.10 |
1.11 |
|
Product detail pictures:
Related Product Guide:
We retain bettering and perfecting our merchandise and service. At the same time, we do the job actively to do research and improvement for PriceList for Seat Cushion - Pu Mould Resin – INOV , The product will supply to all over the world, such as: Slovakia, Seattle, Angola, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Rose from Bolivia - 2017.05.02 18:28
The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
By Roland Jacka from Denver - 2017.09.29 11:19
Write your message here and send it to us
