PriceList for Polyurethane&Polyurea Coating - DSPU-601 – INOV
PriceList for Polyurethane&Polyurea Coating - DSPU-601 – INOV Detail:
DSPU-601
INTRODUCTION
DSPU-601 is two-component polyurea spray type combination, which is used in a variety of base material protection. 100% solid content, no solvents, no volatile, little or no odor, strictly comply with the VOC limit standard, belongs to the environmentally friendly materials.
PHYSICAL PROPERTIES
| Item | Unit | Polyether component | Isocyanate component |
| Appearance | viscous liquid | viscous liquid | |
| Density（20℃） | g/cm3 | 1.02±0.03 | 1.08±0.03 |
| Dynamic Viscosity（25℃） | mPa·s | 650±100 | 800±200 |
| shelf life | month | 6 | 6 |
| Storage Temperature | ℃ | 20-30 | 20-30 |
PRODUCT PACKAGING
200kg /drum
STORAGE
B component (isocyanate) is moisture sensitive. Unused raw materials should be stored in a sealed drum, avoid moisture intrusion .A component (polyether) should stir well before use.
PACKAGING
DTPU-401 is sealed in 20kg or 22.5kg pails and transported in wooden cases.
POTENTIAL HAZARDS
Part B (isocyanates) stimulate the eye, respiratory and skin through breathing and skin contact, and possibly sensitization.
When contact part B ( isocyanates), necessary preventive measures should be taken according to material safety date sheet (MSDS).
WASTE DISPOSAL
With reference to the material safety date sheet (MSDS) of the product, or deal with it in accordance with local laws and regulations.
PROPOSAL OF PROCESS
| Unit | Value | Test Methods | |
| Mix ratio | By volume | 1:1(A:B) | |
| GT | s | 5-10 | GB/T 23446 |
| Surface dry time | s | 15-25 | |
| Temperature of material
-part A -part B |
℃ | 65-70 | |
| Pressure of material
-Part A -Part B |
PSI | 2500 |
PHYSICAL PROPERTIES OF FINISHED PRODUCT
| DSPU-601 | Unit | Test Methods | |
| Hardness | ≥80 | Shore A | GB/T 531.1 |
| Tensile Strength | ≥16 | MPa | GB/T 16777 |
| Elongation at break | ≥450 | % | |
| Tear strength | ≥50 | N/mm | GB/T 529 |
| impervious | ℃ | GB/T 16777 | |
| Bibulous rate | ≤5 | % | GB/T 23446 |
| solid content | 100 | % | GB/T 16777 |
| Adhesive strength, dry base material | ≥2 | Mpa |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
"Quality 1st, Honesty as base, Sincere company and mutual profit" is our idea, in an effort to create consistently and pursue the excellence for PriceList for Polyurethane&Polyurea Coating - DSPU-601 – INOV , The product will supply to all over the world, such as: Madrid, New York, Mecca, Ought to any of these products be of curiosity to you, remember to allow us to know. We are going to be satisfied to give you a quotation on receipt of one's in depth specs. We've our private experienced R&D enginners to meet any of one's requriements, We appear forward to receiving your enquires soon'and hope to have the opportunity to work together with you in the future. Welcome to check out our company.
By Belinda from America - 2018.11.04 10:32
We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
By Griselda from Kazakhstan - 2017.11.11 11:41
