PriceList for Cloth Fit - Other Series – INOV
PriceList for Cloth Fit - Other Series – INOV Detail:
Other Series
INTRODUCTION
This series of polyester polyols have the advantages of high reactivity and good stability. The polyester polyol for producing roller pre-polymer can prepare roller products with low hardness and high wear resistance. The solvent-resistant polyester polyol has the advantages of small deformation, good toughness and long service life in polar organic solvents.
APPLICATION
This series of products are mainly used for producing polyurethane pre-polymer which can be used to produce rubber roller, solvent resistant products, sponge, artificial leather, shoe sole and so on.
TECHNICAL DATA SHEET
|
Grade |
Molecular Weight (g/mol) |
OH Value (mgKOH/g) |
Acid Value (mgKOH/g) |
Water Content (％) |
Application |
|
PE-2315T |
1500 |
73-79 |
≤0.5 |
≤0.03 |
Rollers |
|
PE-2318T |
1800 |
59-65 |
≤0.5 |
≤0.03 |
55-65ARoller |
|
PE-560 |
2000 |
53-59 |
≤0.5 |
≤0.03 |
Solvent resistant roller |
|
PES-25R |
4500 |
23-27 |
≤0.5 |
≤0.03 |
Solvent resistant 0-20A rubber roller |
|
PE-3325 |
1800 |
60-66 |
≤0.5 |
≤0.03 |
Polyester Sponge |
|
PE-Y173 |
1800 |
60-66 |
≤0.5 |
≤0.03 |
Polyester Sponge |
|
PE-2325 |
2000 |
53-59 |
≤0.5 |
≤0.03 |
Sole original solution, adhesive, polyester sponge |
|
PE-2520T |
2000 |
53-59 |
≤0.5 |
≤0.03 |
Leather resin, sole sole, paint |
|
PE-4720 |
2000 |
53-59 |
≤0.5 |
≤0.03 |
Leather resin, paint |
|
PE-6020 |
2000 |
53-59 |
≤0.5 |
≤0.03 |
High-grade leather resin, PUR foam |
|
PE-8040 |
4000 |
27-30 |
≤0.5 |
≤0.03 |
Adhesives, coatings, inks |
|
PE-7030 |
3000 |
35-41 |
≤0.5 |
≤0.03 |
Ink, paint |
Product detail pictures:
Related Product Guide:
Being supported by an advanced and specialist IT team, we could give technical support on pre-sales & after-sales services for PriceList for Cloth Fit - Other Series – INOV , The product will supply to all over the world, such as: Indonesia, Slovenia, Rio de Janeiro, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Anna from Romania - 2018.06.26 19:27
We have been engaged in this industry for many years, we appreciate the work attitude and production capacity of the company, this is a reputable and professional manufacturer.
By Riva from panama - 2018.07.26 16:51
