China New Arrival China Polyurethane Shoe-Sole Resin - DDPU-301 polyurethane grouting material for rescue and relief – INOV Manufacturer and Supplier

New Arrival China Polyurethane Shoe-Sole Resin - DDPU-301 polyurethane grouting material for rescue and relief – INOV

Short Description:

Product Detail

Product Tags

Feedback (2)

Which has a positive and progressive attitude to customer's desire, our corporation constantly improves our merchandise quality to satisfy the desires of consumers and further focuses on safety, reliability, environmental demands, and innovation of Doncool 101 Water Base Blend Polyols, Pipeline Supporting, Shoe Sole, Currently, we are wanting ahead to even bigger cooperation with abroad customers according to mutual positive aspects. Be sure to sense free to contact us for more details.

New Arrival China Polyurethane Shoe-Sole Resin - DDPU-301 polyurethane grouting material for rescue and relief – INOV Detail:

DDPU-301 polyurethane grouting material for rescue and relief

INTRODUCTION

DDPU – 301 is a two-component hydrophobic polyurethane grouting material,designed for rescue and relief . The material have a very short reaction time and quickly transform from a liquid to their final foam form. This material can not only waterproof plugging, but also has a certain reinforcement and stabilization effect. It has been widely used in subway tunnels, water conservancy and hydropower, underground garage, sewer and other fields of waterproof leakage-plugging.

FEATURES

A. Rapid react with water, fast foaming expand and cure. The reaction time can be adjusted according to the amount of component A, generally can be controlled to cure in tens of seconds to minutes.

B. Chemical stability is excellent.

C. High strength. The compressive strength can go over 20MPa within a few hours when molding under airtight conditions;

D. With large infiltration radius and solidification volume ratio, rapid chemical reaction. When the material encounter water, great expansion pressure will be generated to push the slurry deep into the crack to form a tough consolidation.

TYPICAL INDEX

item	index
item	A component CAT.	B component PU
appearance	Light yellow transparent liquid	Tan transparent liquid
density /g/cm3	1.05-1.10	1.15-1.25
viscosity/mpa·s(23±2℃)	≤60	≤600
nonvolatile matter content/%	-	≥90

REACTION TIME

The reaction time depends not only on the rock temperature, but also on the product temperature.The reaction time under different catalyst dosage is measured under laboratory conditions, and it is better to conduct field experiments before grouting.

Temperature is 20℃，the reaction time of 10%water with different amounts of component A.
Component A	5%	10%	15%	20%
Start reaction（s）	15	13	10	10
End reaction（s）	90	60	50	50
expansion rate	Approximate 30times	Approximate 30times	Approximate 30times	Approximate 30times

CURING PERFORMANCE

item	Index
Density /g/cm3	1.05-1.3
Viscosity /mpa·s(23±2℃)	300-600
Setting time /s	≤90
Solid content/%	≥82
Foaming rate/%	≥2000
Compressive strength /MPa	≥20
PS：Setting time can be adjusted according to customer needs；

APPLICATION

A. Seam sealing and waterproof anticorrosive coating of pool, water tower, basement, air raid shelter and other buildings;

B. Anticorrosion of metal and concrete pipelines and steel structures;

C. Dust treatment ，underground tunnel or building foundation reinforcement;

D. Sealing and strengthening of deformation seams, construction joints and structural cracks in construction projects;

E. Sealing leakage and strengthening ports, wharves, piers, dams and hydropower stations;

F. Wall protection and leak plugging in geological drilling, selective water plugging in oil exploitation, and water stop-gushing in the mine, etc.

PACKAGING, STORAGE AND TRANSPORTATION

A. The product shall be stored in clean, dry and airtight iron drums with a volume of 20kg/ drum or 10kg/ drum;

B. Avoid rain, exposure, extrusion and collision during transportation to ensure the package is in good condition;

C. The product should be stored in a ventilated, dry and cool place to avoid direct sunlight and rain.Storage temperature should not be higher than 40 ℃;

D. Under normal storage conditions, the storage time is 6 months

Product detail pictures:

Related Product Guide:

We are experienced manufacturer. Wining the majority of the crucial certifications of its market for New Arrival China Polyurethane Shoe-Sole Resin - DDPU-301 polyurethane grouting material for rescue and relief – INOV , The product will supply to all over the world, such as: Turkey, Islamabad, Lithuania, Our company always concentrate on the development of the international market. We have a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.

Casting Pu Shoe Mould Resin

Dwpu-101 Hydrophilic Groutings

Flexible Packaging Adhesives

Mattress And Sofa Foam System

Methallyl Alcohol Ethoxylate

Ms Sealant&Ms Polymer

Polyurethane&Polyurea Coating

Sealant

Stearic Alcohol Ethoxylates

Vinyl Polyoxyethylene Ether

The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.