Sarimihetsika TPU-hotmelt miorina amin'ny polyester
HARDNESS: MAMPIASA 70 - MAMPIASA ANY 97
Toetran'ny: Ny adhesion tsara amin'ny TPU, nylon, ny pvc, lamba, hoditra ary fitaovana hafa, ary aorian'ny fatorana, dia manana ny toetran'ny hery mifamatotra avo, ny fanoherana sy ny fahatsapana tsara
Fampiharana: Sarimihetsika karana, vovo-dronono, horonantsary mangarahara, lamba familiana, lamba vita amin'ny kiraro, seam sealing kapes sns.
|
IREO SINGA NASIANA |
hamafin'ny | Faharetana amin'ny sintona |
STondro |
MeltFIVARnihinana | LaminatingTEmperature | Tack fotoana malalaka |
| Malagasy | ASTM D2240 | Astm d412 | ASTM D36 | ASTM d1238 | Fomba inov | Fomba inov |
|
Unit | Morontsiraka a | MPHA | ℃ | g / 10min | ℃ | Min |
| T5160 | 97 | 18 | 75 | 33-36 | 70-80 | 3 |
| T5260 | 97 | 20 | 80 | 16-18 | 75-85 | 3.5 |
| T5260H | 97 | 23 | 85 | 11-13 | 80-90 | 4 |
| T6195 | 97 | 25 | 130 | 20-25 | 110-140 | 10 |
| T6185 | 97 | 28 | 140 | 15-20 | 120-150 | 12 |
|
IREO SINGA NASIANA |
hamafin'ny | Faharetana amin'ny sintona | Elongation |
Ffiandohana ambanyTEmperature |
STondro | LaminatingTEmperature |
| Malagasy | ASTM D2240 | Astm d412 | Astm d412 | Fomba inov | ASTM D36 | Fomba inov |
|
Unit | Morontsiraka a | MPHA | % | ℃ | ℃ | ℃ |
| B480 | 81 | 16 | 800 | 95 | 115 | 120-140 |
| B485 | 85 | 18 | 950 | 103 | 125 | 130-150 |
| T5170 | 72 | 18 | 850 | 105 | 126 | 130-150 |
| T5170-1 | 72 | 18 | 850 | 105 | 126 | 100-150 |
| T5175 | 77 | 19 | 800 | 113 | 133 | 140-160 |
| T5175-1 | 77 | 19 | 800 | 113 | 133 | 110-160 |
| T5185-10 | 82 | 24 | 850 | 122 | 146 | 140-160 |
| T5185-9 | 82 | 24 | 850 | 122 | 146 | 120-170 |
| T5190 | 91 | 19 | 750 | 115 | 133 | 140-160 |
