China Manufacturer for Other Series - Pu Mould Resin – INOV Manufacturer and Supplier

Manufacturer for Other Series - Pu Mould Resin – INOV

Short Description:

Product Detail

Product Tags

Feedback (2)

We will constantly satisfy our respected customers with our good excellent, superior value and superior assistance due to we're additional experienced and far more hard-working and do it in cost-effective way for Transparent Tape, Modified Mdi Mdi, Block Foam& Pouring, If you are fascinated in any of our products, you should come to feel no cost to call us for more aspects. We hope to cooperate with a lot more close friends from all over the world.

Manufacturer for Other Series - Pu Mould Resin – INOV Detail:

Pu Mould Resin

COMPOSITION

It consists of A&B component, A is polyol, and B is Iso-terminated polyurethane prepolymer.

CHARACTERISTICS

It has excellent processing properties, short gel time, solid in common temperature. The finished product has good properties of abrasion resistance, anti-hydrolyzing, transparence, good resilience and stable dimension.

APPLICATION

Used for making shoe and different kind of PU moulds. Substitute of Silicon rubber to make the mould of cultural stone.

STORAGE

Store in a cool and dry place. If you can’t use one drum up at one time, please fill Nitrogen gas and seal the drum well. The shelf life of original packing is 6 months.

PHYSICAL PROPERTIES

B	Type	DM1295-B
	Appearance	Colorless or light yellow transparent liquid
	Viscosity（30℃）mPa·s/	1500±150
A	Type	DM1260-A	DM1270-A	DM1280-A	DM1290-A
	Appearance	Light yellow liquid
	Viscosity（30℃）/mPa·s	560±200	650±100	750±100	850±100
Ratio A：B（mass ratio）		1.4:1	1.2:1	1:1	0.7:1
Operation temperature/℃		25～40
Gel time（30℃）^*/min		6～15（variable）
Appearance		Light yellow liquid
Hardness （shore A）		60±2	70±2	80±2	90±2
Tensile strength/MPa		6	8	10	12
Elongation at break/ %		500～700
Tear strength/（kN/m）		25	30	40	40
Rebound/ %		60	55	50	48
Specific gravity（25℃）（g/ cm³）		1.07	1.08	1.10	1.11

Product detail pictures:

Related Product Guide:

Our products are widely recognized and trusted by users and can meet continuously developing economic and social needs for Manufacturer for Other Series - Pu Mould Resin – INOV , The product will supply to all over the world, such as: Costa rica, India, Liberia, The working experience in the field has helped us forged a strong relations with customers and partners both in domestic and international market. For years, our products and solutions have been exported to more than 15 countries in the world and have been widely used by customers.

Eda Base Eda

Polyurethane

Pre-Polymer

Pu Adhesives

The company has a good reputation in this industry, and finally it tured out that choose them is a good choice.

By Miriam from Latvia - 2018.06.18 17:25

Company director has very rich management experience and strict attitude, sales staff are warm and cheerful, technical staff are professional and responsible,so we have no worry about product,a nice manufacturer.

By Jenny from Saudi Arabia - 2018.06.05 13:10

Write your message here and send it to us