Polyether / TDI Typ Prepolymer
D'Produkter hu gutt Verschleißbeständegkeet, Waasserresistenz, Schimmelresistenz, exzellent mechanesch Eegeschaften, a Faarf kann derbäigesat ginn fir d'Faarf unzepassen.Et gëtt benotzt fir Polyurethanprodukter wéi Gummistick, Gummirad, Plack, Gummibeschichtung a verschidde Deeler ze maachen.
Modell | D 1140 | D 1145 | D 1155 | D 1160 | D 1180 | D 1185 |
NCO/% | 4,0±0,2 | 4,5±0,2 | 5,5±0,2 | 6,0±0,2 | 8,0±0,2 | 8,5±0,2 |
Staat bei 20 ℃ | Faarflos transparent Flëssegkeet | |||||
MOCA100 g Prepolymer/g | 11.5 | 13.0 | 16.0 | 17.5 | 23 | 24.0 |
Viskositéit (85 ℃)/mPa·s | 340 | 300 | 250 | 250 | 450 | 400 |
Vermëschungstemperatur /℃ (Prepolymer/MOCA) | 80/120 | 80/120 | 80/120 | 80/120 | 75/110 | 75/110 |
Gelzeit/min | 10 | 9.5 | 9 | 6 | 2 | 2 |
Post Vulkaniséierungszäit (100 ℃) /h | 10 | 10 | 10 | 10 | 10 | 10 |
Hardness (Shore A) | 78±2 | 82±2 | 88±1 | 92±1 |
|
|
Hardness (Shore D) |
|
|
|
| 70±1 | 78±1 |
100% Modulus/MPa | 4.6 | 5.0 | 5.5 | 6.2 | 23.2 | 32,5 |
300% Modulus / MPa | 8.2 | 9.2 | 13.0 | 20.8 | - | - |
Tensile Stäerkt / MPa | 27 | 28 | 32 | 35 | 39 | 42 |
Verlängerung / % | 550 | 480 | 400 | 350 | 230 | 180 |
Tréinekraaft / (KN/m) | 46 | 55 | 76 | 78 | 123 | 145 |
Rebound / % | 28 | 24 | 24 | 33 | 40 | 51 |
Dicht (24℃)/(g/cm3) | 1.11 | 1.12 | 1.14 | 1.14 | 1.18 | 1.18 |
Din wear /mm³ | 148 | 112 | 109 | 141 | 131 | 89 |
Modell | D 1230 | D 1235 | D 1240 | D 1245 | D 1250 | D 1262 | D 1265 | D 1270 |
NCO/% | 3,0±0,1 | 3,5±0,1 | 4,0±0,1 | 4,5±0,2 | 5,0±0,2 | 6,2±0,2 | 6,5±0,2 | 7,0±0,2 |
Staat bei 20 ℃ | Faarflos transparent Flëssegkeet | |||||||
MOCA 100 g Prepolymer/g | 8.6 | 10.3 | 11.5 | 13 | 14.5 | 18 | 19 | 20.5 |
Viskositéit (85 ℃)/mPa·s | 200 | 250 | 350 | 400 | 450 | 240 | 300 | 400 |
Vermëschungstemperatur /℃ (Prepolymer/MOCA) | 85/120 | 85/120 | 80/120 | 80/120 | 80/120 | 75/120 | 75/120 | 75/120 |
Gelzeit/min | 9 | 5 | 4.5 | 4 | 3.5 | 3 | 2.5 | 2 |
Post Vulkaniséierungszäit (100 ℃) /h | 10 | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Hardness (Shore A) | 70±2 | 78±2 | 84±2 | 86±2 | 90±1 | 94±1 | 97±1 (53D) | 60D±1 |
100% Modulus/MPa | 2.1 | 4.2 | 5.4 | 5.9 | 8.9 | 9.2 | 15.2 | 15.8 |
300% Modulus / MPa | 3.0 | 6.3 | 10.0 | 10.3 | 14.6 | 16.8 | 24.6 | 23 |
Tensile Stäerkt / MPa | 7 | 10 | 19 | 21 | 31 | 32 | 35 | 33 |
Verlängerung / % | 600 | 550 | 500 | 480 | 460 | 450 | 440 | 420 |
Tréinekraaft / (KN/m) | 34 | 44 | 53 | 57 | 73 | 78 | 95 | 120 |
Rebound / % | 50 | 48 | 41 | 31 | 30 | 31 | 41 | 43 |
Dicht (24℃)/(g/cm3) | 1.08 | 1.09 | 1.11 | 1.13 | 1.14 | 1.15 | 1.16 | 1.17 |
Din wear /mm³ | 163 | 159 | 116 | 157 | 135 | 117 | 143 | 135,6 |