Performance Inov PolyMeric Blond Campuran Campuran Poliol
Seri Khusus
Pambuka
Seri Polyolma polimer iki dirancang miturut kabutuhan pelanggan. Umume umume 2 utawa 3 fungsi kanthi bobot molekul beda saka 400 nganti 5000.
Aplikasi
Digunakake kanthi akeh kanggo ngasilake elastory polyurethane, lapisan, sealant, adesif. Lan uga bisa ing sistem busa sing kaku kanggo nyuda viskositas sistem kasebut. Sawetara bisa digunakake kanggo ngasilake seal ocf lan MS sealant.
Lembar Data Teknis
| Merek | Werna (Apha) | Ohv (mgkoh / g) | Kunjungan (MPA.S / 25 ℃) | H2O konten (%) | Nilai asam (mgkoh / g) | PH | K+ (mg / kg) | Aplikasi |
| Inovol s207h | ≤100 | 150-170 | 2300-3000 | ≤0.02 | ≤0.05 | 5.0-7.0 | - | Digunakake kanggo elastor poliurter, lapisan, styrofoam ocf, adhesives, lsp. |
| Inovol s210h | ≤50 | 107-116 | 1200-1600 | ≤0.02 | ≤0.05 | 5.0-7.0 | - | Digunakake kanggo agen sambungan Chain Polyurethane, poliuretana adesif lsp., Kanggo nambah kekerasan, properti mekanik lan kekuatan ades. |
| Inovol s215h | ≤50 | 72.0-76.0 | 800-1100 | ≤0.02 | ≤0.05 | 5.0-7.0 | - | Digunakake kanggo elastomer poliurthane, adesesif, sealants, lapisan, lapisan anti banyu, slurry kulit, sliramu kulit lsp, kanggo nambah adhesion. |
| Inovol s220h | ≤50 | 54.0-58.0 | 780-980 | ≤0.02 | ≤0.05 | 5.0-7.0 | - | Digunakake kanggo elastomer poliurthane, adesesif, sealants, lapisan, lapisan anti banyu, slurry kulit, sliramu kulit lsp, kanggo nambah adhesion. |
| Inovol s3033 | ≤50 | 535-575 | 200-400 | ≤0.10 | ≤0.20 | 5.0-7.5 | ≤80 | Kegiatan PolyTer Polylet sing dhuwur, digunakake kanggo agen lintas poliuretana. |
| Inovol s2000t | ≤50 | 53.0-59.0 | 1500-2500 | ≤0.02 | ≤0.05 | 5.0-7.0 | - | Digunakake kanggo busa poliuretana, adesus basis banyu, elastomer, adhesives, lsp kanggo nambah sifat mekanik, adhesi, resistensi cuaca |
| Inovol s200t | ≤200 | 42.5-47.5 | 1000-1800 | ≤0.02 | ≤0.05 | 5.0-7.0 | - | Digunakake kanggo busa poliuretana, adesus basis banyu, elastomer, adhesives, lsp kanggo nambah sifat mekanik, adhesi, resistensi cuaca |
| Inovol s5000t | ≤50 | 32.0-36.0 | 1100-1500 | ≤0.08 | ≤0.08 | 5.0-7.5 | ≤5 | Agen pambukaan Foam kanggo umpan tahanan sing dhuwur kanggo nambah kemampuan busa umpluk lan nyuda nyusut busa |
| Inovol s25k | ≤30 | 22.5-27.5 | 2000-240000 | ≤0.08 | ≤0.08 | 5.0-7.5 | ≤5 | Agen pambukaan Foam kanggo umpan tahanan sing dhuwur kanggo nambah kemampuan busa umpluk lan nyuda nyusut busa |
| Inovol s350t | ≤50 | 32.0-36.0 | 1100-1500 | ≤0.08 | ≤0.08 | 5.0-7.5 | ≤5 | Agen pambukaan Foam kanggo umpan tahanan sing dhuwur kanggo nambah kemampuan busa umpluk lan nyuda nyusut busa |
| Inovol s01x | ≤50 | 54.0-58.0 | 400-700 | ≤0.05 | ≤0.05 | 5.0-7.0 | - | Digunakake minangka defoamer |
