Ihe nkiri TPU-Hotmelt dabere na Polyester
Isi ike: Shore A 70 - Shore A 97
Njirimara: Ezi adhesion na TPU, naịlọn, PVC, akwa, akpụkpọ anụ na ihe ndị ọzọ, na mgbe njikọta, ọ nwere njirimara nke ike njikọ dị elu, ịdị elu siri ike, na-eyi nguzogide na ịdị mma dị mma.
Ngwa: Ihe nkiri Calendered, Milled powder, Transparent film, fabric lamination, Shoe material, Seam sealing teepu etc.
Ihe |
Isi ike | Ike ọdụdọ |
Smgbe mgbe |
MeltFalaRrie | LaminatingTeze ukwu | Chekwaa oge efu |
Ọkọlọtọ | ASTM D2240 | ASTM D412 | ASTM D36 | ASTM D1238 | Usoro INOV | Usoro INOV |
Nkeji | Shore A | MPa | ℃ | g/10 nkeji | ℃ | min |
T5160 | 97 | 18 | 75 | 33-36 | 70-80 | 3 |
T5260 | 97 | 20 | 80 | 16-18 | 75-85 | 3.5 |
T5260H | 97 | 23 | 85 | 11-13 | 80-90 | 4 |
T6195 | 97 | 25 | 130 | 20-25 | 110-140 | 10 |
T6185 | 97 | 28 | 140 | 15-20 | 120-150 | 12 |
Ihe |
Isi ike | Ike ọdụdọ | Ogologo oge |
Fmmalite mmaliteTeze ukwu |
Smgbe mgbe | LaminatingTeze ukwu |
Ọkọlọtọ | ASTM D2240 | ASTM D412 | ASTM D412 | Usoro INOV | ASTM D36 | Usoro INOV |
Nkeji | Shore A | MPa | % | ℃ | ℃ | ℃ |
B480 | 81 | 16 | 800 | 95 | 115 | 120-140 |
B485 | 85 | 18 | 950 | 103 | 125 | 130-150 |
T5170 | 72 | 18 | 850 | 105 | 126 | 130-150 |
T5170-1 | 72 | 18 | 850 | 105 | 126 | 100-150 |
T5175 | 77 | 19 | 800 | 113 | 133 | 140-160 |
T5175-1 | 77 | 19 | 800 | 113 | 133 | 110-160 |
T5185-10 | 82 | 24 | 850 | 122 | 146 | 140-160 |
T5185-9 | 82 | 24 | 850 | 122 | 146 | 120-170 |
T5190 | 91 | 19 | 750 | 115 | 133 | 140-160 |