China Hot-selling Donboiler 214 Hfc-245fa Base Blend Polyols - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV Manufacturer and Supplier

Hot-selling Donboiler 214 Hfc-245fa Base Blend Polyols - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV

Short Description:

Product Detail

Product Tags

Feedback (2)

"Based on domestic market and expand abroad business" is our progress strategy for Bike Seat, Pu Adhesives, Open Cell Agent, We guaranteed high quality, if clients were not satisfied with the products' quality, you can return inside 7days with their original states.

Hot-selling Donboiler 214 Hfc-245fa Base Blend Polyols - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV Detail:

Doncool 106 CP/ HFO-1233zd base blend polyols

INTRODUCTION

DonCool 106 blend polyols use CP mixed with HFO-1233zd as blowing agent, it applies to refrigerators, freezers, electric water heaters and other products thermal insulation, the characteristics are as follows,

1-Excellent flowability, foam density distributes uniformity, low thermal conductivity

2- Outstanding low temperature dimension stability and cohesiveness

3-Demoulding time is 4-8min.

PHYSICAL PROPERTY

Appearance	Yellowish-brown transparent liquid
Hydroxyl Value mgKOH/g	320-370
Dynamic Viscosity /25℃ mPa.s	4000-5000
Specific Gravity /20℃ g/ml	1.05-1.10
Storage Temperature ℃	10-20
Shelf life (unmixed materials)※ Month	3
Shelf life (premixed materials) ※ Month	1 (Material Temperature below 20℃)

※Store in dry original drums/IBCs at recommended storage temperature.

RECOMMENDED RATIO

	pbw
DonCool 106 blend polyols	100
CP	12.5
LBA	7
ISO	143.4-149.4

TECHNOLOGY AND REACTIVITY CHARACTERISTICS (Material Temperature is 20℃, the actual value varied as per process conditions)

Manual Mixing（low pressure machine)

High Pressure Machine Mixing

Cream Time s

Gel time s

Tack free time s

Free density kg/m³

8-10

70-80

100-130

23-23.5

6-8

50-70

70-100

22-23

FOAM PERFORMANCES

Moulding Density	GB/T 6343	30-32kg/m³
Closed-cell rate	GB/T 10799	≥90%
Thermal Conductivity（10℃）	GB/T 3399	≤18.5 mW/(m.K)
Compressive strength	GB/T 8813	≥140kPa
Dimensional stability 24h -20℃	GB/T 8811	≤1.0%
24h 100℃	GB/T 8811	≤1.5%

The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.

Product detail pictures:

Related Product Guide:

we are able to supply top quality items, aggressive price and greatest buyer assistance. Our destination is "You come here with difficulty and we offer you a smile to take away" for Hot-selling Donboiler 214 Hfc-245fa Base Blend Polyols - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV , The product will supply to all over the world, such as: French, Latvia, Auckland, Immediate and expert after-sale service supplied by our consultant group has happy our buyers. Comprehensive Info and parameters from the merchandise will probably be sent to you for any comprehensive acknowledge. Free samples may be delivered and company check out to our corporation. n Morocco for negotiation is constantly welcome. Hope to get inquiries type you and construct a long-term co-operation partnership.

Doncool 101 Water Base Blend Polyols

Doncool 104m Hfc-245fa/Cp Base Blend Polyols

Donfoam 601 Water Base Blend Polyols

Donfoam 603 Ecomate Base Blend Polyols

Donspray 502 Hcfc-141b Base Blend Polyols

High Hardness Two Component System

Low Hardness Polyurethane System

Modified Silane Rasin.Water-Stop Groutings

Thermoplastic Polyurethane Series

Three Component Mdi Polyurethane System Mdi

The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!

By Laura from Portland - 2018.02.04 14:13

The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.

By Eunice from Lebanon - 2017.05.21 12:31

Write your message here and send it to us