Hot-selling Donboiler 214 Hfc-245fa Base Blend Polyols - Doncool 105 HFC-365mfc base blend polyols – INOV
Hot-selling Donboiler 214 Hfc-245fa Base Blend Polyols - Doncool 105 HFC-365mfc base blend polyols – INOV Detail:
Doncool 105 HFC-365mfc base blend polyols
INTRODUCTION
DonCool 105 blend polyols use HFC-365mfc/227ea(93/7) as blowing agent, it applies to refrigerators, freezers, Air conditioning boards and other products thermal insulation.
PHYSICAL PROPERTY
| Appearance |
Light yellow transparent liquid |
| Hydroxyl Value mgKOH/g |
300-400 |
| Dynamic Viscosity /25℃ mPa.s |
400-500 |
| Specific Gravity /20℃ g/ml |
1.10-1.15 |
| Storage Temperature ℃ |
10-30 |
| Shelf life ※ Month |
6 |
※Store in dry original drums/IBCs at recommended storage temperature.
RECOMMENDED RATIO
|
pbw |
|
| DonCool 105 blend polyols |
100 |
| ISO |
130-135 |
TECHNOLOGY AND REACTIVITY CHARACTERISTICS (Material Temperature is 20℃, the actual value varied as per process conditions)
|
Manual Mixing（low pressure machine) |
High Pressure Machine Mixing |
|
| Cream Time s
Gel time s Tack free time s Free density kg/m3 |
10-14 65-85 100-130 26-28 |
6-10 45-60 70-100 25-27 |
FOAM PERFORMANCES
| Moulding Density | GB/T 6343 | 34-36kg/m3 |
| Closed-cell rate | GB/T 10799 | ≥90% |
| Thermal Conductivity（10℃） | GB/T 3399 | ≤21 mW/(m.K) |
| Compressive strength | GB/T 8813 | ≥150kPa |
| Dimensional stability 24h -20℃ | GB/T 8811 | ≤1.0% |
|
24h 100℃ |
≤1.5% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
We are proud of the superior customer gratification and wide acceptance due to our persistent pursuit of top of the range both of those on merchandise and service for Hot-selling Donboiler 214 Hfc-245fa Base Blend Polyols - Doncool 105 HFC-365mfc base blend polyols – INOV , The product will supply to all over the world, such as: Suriname, Netherlands, Austria, We also have the strong ability of integration to supply our best service, and plan to build the warehouse in the different countries around the world, that will probably be more conveniently to service our customers.
By Jacqueline from Belgium - 2018.09.21 11:44
The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
By Tony from French - 2018.11.02 11:11
