Hot New Products Casting Polyurethane Series Cpu - Donpanel 423 CP/IP base blend polyols for continuous PIR – INOV
Hot New Products Casting Polyurethane Series Cpu - Donpanel 423 CP/IP base blend polyols for continuous PIR – INOV Detail:
Donpanel 423 CP/IP base blend polyols for continuous PIR
INTRODUCTION
DonPanel 423 system is a four components system which consists of blend polyols, polymeric MDI, catalyst and blowing agent (pentane series). The foam has good thermal insulation property, light in weight, high compression strength and flame retardant and other advantages. It is widely used to produce continuous sandwich panels, corrugated panels etc, which applies to make cold stores, cabinets, portable shelters and so on.
PHYSICAL PROPERTY
K1-blend polyols DonPanel 423
Appearance |
Light yellow to brown transparent liquid |
OHvalue mgKOH/g |
260-300 |
Dynamic viscosity(25℃) mPa.S |
1800-2200 |
Density (20℃) g/ml |
1.10-1.16 |
Storage temperature ℃ |
10-25 |
Storage stability month |
6 |
K2-Polymeric MDI DD-44V80
Appearance |
brown transparent liquid |
NCO content % |
30.50 |
Dynamic viscosity (25℃) mPa.S |
600-700 |
Density (20℃) g/ml |
1.24 |
Storage temperature ℃ |
10-25 |
Storage stability month |
12 |
K3-Cat 2816
Appearance |
Light yellow transparent liquid |
Dynamic viscosity (25℃) mPa.S |
1200-1600 |
Density (20℃) g/ml |
0.96 |
Storage temperature ℃ |
10-25 |
Storage stability month |
6 |
RECOMMENDED RATIO
Raw materials |
pbw |
DonPanel 423 |
100 g |
Cat2816 |
1-3 g |
Pentane (Cyclopentane/Isopentane) |
7-10 g |
Polymeric MDI DD-44V80 |
135-155 g |
TECHNOLOGY AND REACTIVITY (the exact value varies depending on processing conditions)
Items |
Manual mixing |
High pressure machine |
Raw material temperature ℃ |
20-25 |
20-25 |
Mould temperature ℃ |
45-55 |
45-55 |
Cream time s |
10-15 |
6-10 |
Gel time s |
40-60 |
40-60 |
Free density kg/m3 |
34.0-36.0 |
33.0-35.0 |
MACHINERY FOAM PERFORMANCES
Mold density | ISO 845 |
≥38kg/m3 |
Closed-cell rate | ASTM D 2856 |
≥90% |
Thermal conductivity (15℃) | EN 12667 |
≤24mW/(m.K) |
Compression strength | EN 826 |
≥120kPa |
Adhesive strength | GB/T 16777 |
≥100kPa |
Dimensional stability 24h -30℃ | ISO 2796 |
≤0.5% |
24h -100℃ |
≤1.0% |
|
Flame retardant grade | DIN 4102 |
Level B2 (no burning) |
Water absorption ratio | GB 8810 |
≤3% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
We support our consumers with ideal good quality merchandise and large level provider. Becoming the specialist manufacturer in this sector, we have attained wealthy practical encounter in producing and managing for Hot New Products Casting Polyurethane Series Cpu - Donpanel 423 CP/IP base blend polyols for continuous PIR – INOV , The product will supply to all over the world, such as: European, Gabon, Costa Rica, We put the product quality and customer's benefits to the first place. Our experienced salesmen supply prompt and efficient service. Quality control group make sure the best quality. We believe quality comes from detail. If you have demand, allow us to work together to get success.
By Lynn from Australia - 2018.06.30 17:29
The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
By Cheryl from Singapore - 2017.01.11 17:15