High reputation Castable Polyurethane Shoe Mould Prepolymer - Donpipe 322 HCFC-141b base blend polyols for pipeline shell – INOV

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Sticking for the principle of "Super Quality, Satisfactory service" ,We have been striving for being a superb small business partner of you for Pu Furniture, Fitment, Solvent Resistance Curing System, As a result of our hard perform, we have always been around the forefront of clean technology merchandise innovation. We've been a eco-friendly partner you can rely on. Get hold of us today for additional data!
High reputation Castable Polyurethane Shoe Mould Prepolymer - Donpipe 322 HCFC-141b base blend polyols for pipeline shell – INOV Detail:

Donpipe 322 HCFC-141b base blend polyols for pipeline shell

INTRODUCTION

DonPipe 322 is a kind of blend polyols with  hcfc-141b as foaming agent, taking polyol as the main raw material, mixing with a special auxiliary. This material suitable for outer thermal insulation shells which are used for  water, oil and gas pipelines .The polyurethane product prepared by reacting it with isocyanate has the following advantages:

– good compressive strength and dimensional stability

– high close-cell rate and good waterproof performance

– good insulation performance

PHYSICAL PROPERTY

 

DonPipe 322

Appearance                 

Hydroxyl value                 mgKOH/g

Dynamic viscosity (25℃)   mPa.S

Density (20℃)             g/ml

Storage temperature             ℃

Storage stability               months

Light yellow transparent viscous liquid

200-400

200-400

1.1-1.16

10-25

6

RECOMMENDED RATIO

 

Pbw

DonPipe 322

Isocyanate

100

120-160

TECHNOLOGY AND REACTIVITY (the exact value varies depending on processing conditions)

 

Manual mix

High pressure

Raw material temperature    ℃

CT      S

GT      S

TFT      S

Free density   Kg/m3

20-25

7-15

30-50

40-60

25-30

20-25

6-12

20-40

30-50

25-30

FOAM PERFORMANCES

old density

Close-cell rate

Thermal conductivity (10℃)

Compression strength)

Dimensional stability        24h -20℃ 

                      24h 100℃

Flammability

GB/T 6343

 GB/T 10799

GB/T 3399

GB/T 8813

GB/T 8811

 

GB/T 8624

≥50Kg/m3

≥90%

≤22mW/m.k

≥150 KPa

≤0.5%

≤1.0%

B3、B2、B1


Product detail pictures:

High reputation Castable Polyurethane Shoe Mould Prepolymer - Donpipe 322 HCFC-141b base blend polyols for pipeline shell – INOV detail pictures

High reputation Castable Polyurethane Shoe Mould Prepolymer - Donpipe 322 HCFC-141b base blend polyols for pipeline shell – INOV detail pictures


Related Product Guide:

We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of High reputation Castable Polyurethane Shoe Mould Prepolymer - Donpipe 322 HCFC-141b base blend polyols for pipeline shell – INOV , The product will supply to all over the world, such as: Accra, Korea, Costa rica, Our staffs are rich in experience and trained strictly, with qualified knowledge, with energy and always respect their customers as the No. 1, and promise to do their best to deliver the effective and individual service for customers. The Company pays attention to maintaining and developing the long-term cooperation relationship with the customers. We promise, as your ideal partner, we'll develop a bright future and enjoy the satisfying fruit together with you, with persisting zeal, endless energy and forward spirit.
  • This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.
    5 Stars By Louis from Germany - 2018.12.10 19:03
    The supplier cooperation attitude is very good, encountered various problems, always willing to cooperate with us, to us as the real God.
    5 Stars By Christina from Denver - 2017.10.23 10:29
    Write your message here and send it to us