High reputation Castable Polyurethane Shoe Mould Prepolymer - Donpipe 322 HCFC-141b base blend polyols for pipeline shell – INOV
High reputation Castable Polyurethane Shoe Mould Prepolymer - Donpipe 322 HCFC-141b base blend polyols for pipeline shell – INOV Detail:
Donpipe 322 HCFC-141b base blend polyols for pipeline shell
INTRODUCTION
DonPipe 322 is a kind of blend polyols with hcfc-141b as foaming agent, taking polyol as the main raw material, mixing with a special auxiliary. This material suitable for outer thermal insulation shells which are used for water, oil and gas pipelines .The polyurethane product prepared by reacting it with isocyanate has the following advantages:
– good compressive strength and dimensional stability
– high close-cell rate and good waterproof performance
– good insulation performance
PHYSICAL PROPERTY
|
DonPipe 322 |
|
| Appearance
Hydroxyl value mgKOH/g Dynamic viscosity （25℃） mPa.S Density （20℃） g/ml Storage temperature ℃ Storage stability months |
Light yellow transparent viscous liquid 200-400 200-400 1.1-1.16 10-25 6 |
RECOMMENDED RATIO
|
Pbw |
|
| DonPipe 322
Isocyanate |
100 120-160 |
TECHNOLOGY AND REACTIVITY (the exact value varies depending on processing conditions)
|
Manual mix |
High pressure |
|
| Raw material temperature ℃
CT S GT S TFT S Free density Kg/m3 |
20-25 7-15 30-50 40-60 25-30 |
20-25 6-12 20-40 30-50 25-30 |
FOAM PERFORMANCES
| old density
Close-cell rate Thermal conductivity （10℃） Compression strength） Dimensional stability 24h -20℃ 24h 100℃ Flammability |
GB/T 6343 GB/T 10799 GB/T 3399 GB/T 8813 GB/T 8811
GB/T 8624 |
≥50Kg/m3 ≥90% ≤22mW/m.k ≥150 KPa ≤0.5% ≤1.0% B3、B2、B1 |
Product detail pictures:
Related Product Guide:
With our excellent management, strong technical capability and strict quality control system, we continue to provide our clients with reliable quality, reasonable prices and excellent services. We aim at becoming one of your most reliable partners and earning your satisfaction for High reputation Castable Polyurethane Shoe Mould Prepolymer - Donpipe 322 HCFC-141b base blend polyols for pipeline shell – INOV , The product will supply to all over the world, such as: Romania, Bandung, Burundi, Most problems between suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question items they do not understand. We break down people barriers to ensure you get what you want to the level you expect, when you want it. Faster delivery time and the product you want is our Criterion .
By Rebecca from Honduras - 2017.05.21 12:31
Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
By Amy from Malaysia - 2018.09.29 17:23
