China High reputation Castable Polyurethane Shoe Mould Prepolymer - Donpanel 415PIR HFC-365mfc base blend polyols for PIR – INOV Manufacturer and Supplier

High reputation Castable Polyurethane Shoe Mould Prepolymer - Donpanel 415PIR HFC-365mfc base blend polyols for PIR – INOV

Short Description:

Product Detail

Product Tags

Feedback (2)

We have been proud from the higher consumer gratification and wide acceptance due to our persistent pursuit of high quality both on product or service and service for Polyethylene Glycol, Tpu Hot-Melt Adhesive Granules, Artificial Leather, Welcome your enquiry, best service will be provided with full heart.

High reputation Castable Polyurethane Shoe Mould Prepolymer - Donpanel 415PIR HFC-365mfc base blend polyols for PIR – INOV Detail:

Donpanel 422 HCFC-141b base blend polyols for continuous PUR

INTRODUCTION

DonPanel 415/PIR is a compound which consists of polyols, surfactants, catalysts, and flame retardant , mixture of HFC-245fa as blowing agent in a special ratio. The foam has good thermal insulation property, light weight, high compression strength and flame retardant and other advantages. It is widely used to produce sandwich plates, corrugated panels etc, which applies to make cold stores, cabinets, portable shelters etc.

PHYSICAL PROPERTY

	DonPanel 415/PIR	ISO
Appearance	Light yellow to brown liquid	Brown liquid
Hydroxyl value mgKOH/g	200-300	N/A
Dynamic viscosity （25℃） mPa.S	300-500	200-250
Specific gravity （20℃） g/ml	1.10-1.16	1.20-1.25
Storage temperature ℃	10-25	10-25
Storage stability month	6	12

RECOMMENDED RATIO

Raw materials	PBW
DonPanel 415/PIR	100
Isocyanate	130-150

TECHNOLOGY AND REACTIVITY (the exact value varies depending on processing conditions)

Items	Manual mixing	High Pressure Injection machine
Raw material temperature ℃	20-25	20-25
Moulding temperature ℃	35-45	35-45
Cream time s	30-50	20-30
Gel time s	120-200	70-150
Free density kg/m3	28-31	27-30

FOAM PERFORMANCES

Moulding density	ASTM D 1622-08	≥45kg/m3
Closed cell content	ASTM D 2856	≥90%
Thermal conductivity（23℃）	ASTM C 518-10	≤24mW/(m.K)
Compression strength	ASTM D 1621-10	≥140kPa
Dimensional stability 24h -20℃ 24h 100℃	ASTM D 2126-09	≤1% ≤1.5%
Flammability	DIN4102	B2

The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.

Product detail pictures:

Related Product Guide:

Being supported by an innovative and experienced IT team, we could present technical support on pre-sales & after-sales service for High reputation Castable Polyurethane Shoe Mould Prepolymer - Donpanel 415PIR HFC-365mfc base blend polyols for PIR – INOV , The product will supply to all over the world, such as: Burundi, South Africa, Victoria, Our solutions have national accreditation requirements for qualified, good quality items, affordable value, was welcomed by individuals all over the world. Our goods will continue to improve inside the order and appear forward to cooperation with you, Really should any of those items be of interest to you, please letus know. We will be satisfied to provide you a quotation up on receipt of the detailed needs.

Castable Polyurethane Gel Insole Prepolymer