China High Quality Sealant - DDPU-301 polyurethane grouting material for rescue and relief – INOV Manufacturer and Supplier

High Quality Sealant - DDPU-301 polyurethane grouting material for rescue and relief – INOV

Short Description:

Product Detail

Product Tags

Feedback (2)

Our personnel are generally in the spirit of "continuous improvement and excellence", and together with the outstanding top quality merchandise, favorable price tag and fantastic after-sales solutions, we try to gain every single customer's rely on for Sandwich Running Track, Polyester Polyol, Flexible Foams Series, Our ultimate target is usually to rank as a top brand also to lead as a pioneer in our field. We are sure our profitable experience in tool generation will gain customer's trust, Wish to co-operate and co-create a far better foreseeable future with you!

High Quality Sealant - DDPU-301 polyurethane grouting material for rescue and relief – INOV Detail:

DDPU-301 polyurethane grouting material for rescue and relief

INTRODUCTION

DDPU – 301 is a two-component hydrophobic polyurethane grouting material,designed for rescue and relief . The material have a very short reaction time and quickly transform from a liquid to their final foam form. This material can not only waterproof plugging, but also has a certain reinforcement and stabilization effect. It has been widely used in subway tunnels, water conservancy and hydropower, underground garage, sewer and other fields of waterproof leakage-plugging.

FEATURES

A. Rapid react with water, fast foaming expand and cure. The reaction time can be adjusted according to the amount of component A, generally can be controlled to cure in tens of seconds to minutes.

B. Chemical stability is excellent.

C. High strength. The compressive strength can go over 20MPa within a few hours when molding under airtight conditions;

D. With large infiltration radius and solidification volume ratio, rapid chemical reaction. When the material encounter water, great expansion pressure will be generated to push the slurry deep into the crack to form a tough consolidation.

TYPICAL INDEX

item	index
item	A component CAT.	B component PU
appearance	Light yellow transparent liquid	Tan transparent liquid
density /g/cm3	1.05-1.10	1.15-1.25
viscosity/mpa·s(23±2℃)	≤60	≤600
nonvolatile matter content/%	-	≥90

REACTION TIME

The reaction time depends not only on the rock temperature, but also on the product temperature.The reaction time under different catalyst dosage is measured under laboratory conditions, and it is better to conduct field experiments before grouting.

Temperature is 20℃，the reaction time of 10%water with different amounts of component A.
Component A	5%	10%	15%	20%
Start reaction（s）	15	13	10	10
End reaction（s）	90	60	50	50
expansion rate	Approximate 30times	Approximate 30times	Approximate 30times	Approximate 30times

CURING PERFORMANCE

item	Index
Density /g/cm3	1.05-1.3
Viscosity /mpa·s(23±2℃)	300-600
Setting time /s	≤90
Solid content/%	≥82
Foaming rate/%	≥2000
Compressive strength /MPa	≥20
PS：Setting time can be adjusted according to customer needs；

APPLICATION

A. Seam sealing and waterproof anticorrosive coating of pool, water tower, basement, air raid shelter and other buildings;

B. Anticorrosion of metal and concrete pipelines and steel structures;

C. Dust treatment ，underground tunnel or building foundation reinforcement;

D. Sealing and strengthening of deformation seams, construction joints and structural cracks in construction projects;

E. Sealing leakage and strengthening ports, wharves, piers, dams and hydropower stations;

F. Wall protection and leak plugging in geological drilling, selective water plugging in oil exploitation, and water stop-gushing in the mine, etc.

PACKAGING, STORAGE AND TRANSPORTATION

A. The product shall be stored in clean, dry and airtight iron drums with a volume of 20kg/ drum or 10kg/ drum;

B. Avoid rain, exposure, extrusion and collision during transportation to ensure the package is in good condition;

C. The product should be stored in a ventilated, dry and cool place to avoid direct sunlight and rain.Storage temperature should not be higher than 40 ℃;

D. Under normal storage conditions, the storage time is 6 months

Product detail pictures:

Related Product Guide:

Our company has been focusing on brand strategy. Customers' satisfaction is our best advertising. We also supply OEM service for High Quality Sealant - DDPU-301 polyurethane grouting material for rescue and relief – INOV , The product will supply to all over the world, such as: Cologne, Lithuania, Suriname, Adhering to the principle of "Enterprising and Truth-Seeking, Preciseness and Unity", with technology as the core, our company continues to innovate, dedicated to providing you with the highest cost-effective solutions and meticulous after-sales service. We firmly believe that: we're outstanding as we have been specialized.

Casting Pu Shoe Upper Resin