High Quality Polyurethane Rigid Foam System - Doncool 103 CP/IP base blend polyols – INOV
High Quality Polyurethane Rigid Foam System - Doncool 103 CP/IP base blend polyols – INOV Detail:
Doncool 103 CP/IP base blend polyols
INTRODUCTION
Doncool 103 is blend polyols uses CP or CP/IP as blowing agent, which applies to refrigerators, freezers, and other insulation products. The characteristics of the products are as follows
1. Excellent flow ability, the density of the foam is well-distributed, and the thermal conductivity is low
2. Excellent low-temperature dimensional stability and good cohesiveness;
3. Demoulding time is 6-8 minutes.
PHYSICAL PROPERTY
| Appearance |
Pale yellow transparent liquid |
| Hydroxyl value mgKOH/g |
360-420 |
| Dynamic viscosity（25℃） mPa.S |
3000-4000 |
| Specific gravity (20℃) g/ml |
1.06-1.08 |
| Storage temperature ℃ |
10-25 |
| Pot life Month |
6 |
RECOMMENDED RATIO
|
|
pbw |
|
Doncool 102 |
100 |
| CP or CP/IP |
12-14 |
| Isocyanate |
136-142 |
TECHNOLOGY AND REACTIVITY (the actual value varied as per process conditions)
|
|
Manual mixing |
High pressure machine |
| Material Temperature ℃ |
20-25 |
20-25 |
| Mould Temperature ℃ |
35-40 |
35-40 |
| Cream time s |
12-16 |
8-12 |
| Gel time s |
75-85 |
50-70 |
| Tack free time s |
100-120 |
70-100 |
| Free density kg/m3 |
25-26 |
24-25 |
FOAM PERFORMANCES
| Mold density | GB/T 6343 | ≥35kg/m3 |
| Closed-cell rate | GB/T 10799 |
≥90% |
| Thermal conductivity （15℃） | GB/T 3399 | ≤22 mW/(m.K) |
| Compression strength | GB/T8813 | ≥150kPa |
| Dimensional stability 24h -20℃ | GB/T8811 |
≤0.5% |
|
24h 100℃ |
≤1.0% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
Adhering into the theory of "quality, services, efficiency and growth", now we have gained trusts and praises from domestic and international shopper for High Quality Polyurethane Rigid Foam System - Doncool 103 CP/IP base blend polyols – INOV , The product will supply to all over the world, such as: Uruguay, Nepal, Leicester, Our tenet is "integrity first, quality best". We have confidence in providing you with excellent service and ideal products. We sincerely hope we can establish win-win business cooperation with you in the future!
By Kim from Czech Republic - 2017.11.20 15:58
On this website, product categories is clear and rich, I can find the product I want very quickly and easily, this is really very good!
By Bernice from Australia - 2018.06.18 17:25
