High definition Donspray 502 Hcfc-141b Base Blend Polyols - Doncool 103 CP/IP base blend polyols – INOV
High definition Donspray 502 Hcfc-141b Base Blend Polyols - Doncool 103 CP/IP base blend polyols – INOV Detail:
Doncool 103 CP/IP base blend polyols
INTRODUCTION
Doncool 103 is blend polyols uses CP or CP/IP as blowing agent, which applies to refrigerators, freezers, and other insulation products. The characteristics of the products are as follows
1. Excellent flow ability, the density of the foam is well-distributed, and the thermal conductivity is low
2. Excellent low-temperature dimensional stability and good cohesiveness;
3. Demoulding time is 6-8 minutes.
PHYSICAL PROPERTY
| Appearance |
Pale yellow transparent liquid |
| Hydroxyl value mgKOH/g |
360-420 |
| Dynamic viscosity（25℃） mPa.S |
3000-4000 |
| Specific gravity (20℃) g/ml |
1.06-1.08 |
| Storage temperature ℃ |
10-25 |
| Pot life Month |
6 |
RECOMMENDED RATIO
|
|
pbw |
|
Doncool 102 |
100 |
| CP or CP/IP |
12-14 |
| Isocyanate |
136-142 |
TECHNOLOGY AND REACTIVITY (the actual value varied as per process conditions)
|
|
Manual mixing |
High pressure machine |
| Material Temperature ℃ |
20-25 |
20-25 |
| Mould Temperature ℃ |
35-40 |
35-40 |
| Cream time s |
12-16 |
8-12 |
| Gel time s |
75-85 |
50-70 |
| Tack free time s |
100-120 |
70-100 |
| Free density kg/m3 |
25-26 |
24-25 |
FOAM PERFORMANCES
| Mold density | GB/T 6343 | ≥35kg/m3 |
| Closed-cell rate | GB/T 10799 |
≥90% |
| Thermal conductivity （15℃） | GB/T 3399 | ≤22 mW/(m.K) |
| Compression strength | GB/T8813 | ≥150kPa |
| Dimensional stability 24h -20℃ | GB/T8811 |
≤0.5% |
|
24h 100℃ |
≤1.0% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
Sticking to the principle of "Super Quality, Satisfactory service" ,We are striving to be a good business partner of you for High definition Donspray 502 Hcfc-141b Base Blend Polyols - Doncool 103 CP/IP base blend polyols – INOV , The product will supply to all over the world, such as: Estonia, Mecca, Ireland, Many years of work experience, we have realized the importance of providing good quality products and the best before-sales and after-sales services. Most problems between suppliers and clients are due to poor communication. Culturally, suppliers can be reluctant to question things they do not understand. We break down those barriers to ensure you get what you want to the level you expect, when you want it. faster delivery time and the product you want is our Criterion .
By Ingrid from Mauritius - 2018.09.21 11:44
The after-sale warranty service is timely and thoughtful, encounter problems can be resolved very quickly, we feel reliable and secure.
By Kitty from Colombia - 2018.06.26 19:27
