Polyurethane mold manne
Kyakkyawan aiki na tsari, za'a iya warkewa a cikin zafin jiki, ɗan gajeren lokacin lalata, kuma ana iya ƙara launi don daidaita launi.Ƙarshen roba yana da tsayayyar lalacewa mai kyau, juriya na ruwa, nuna gaskiya, mai kyau elasticity da tsayin daka.
Za a iya maye gurbin silicon roba samar "al'ada dutse" mold.Hakanan za'a iya amfani dashi don tukunyar kayan lantarki, nadi na roba, farantin roba, dabaran roba da ƙirar takalma da sauran kayayyaki.
Bangaren B | abin koyi | DM1295-B | |||
bayyanar | Ruwa mara launi zuwa rawaya mai haske | ||||
danko (30 ℃) mPa·s/ | 1500± 150 | ||||
Bangaren A | abin koyi | DM1260-A | DM1270-A | DM1280-A | DM1290-A |
bayyanar | Ruwan rawaya mai haske | ||||
(30 ℃)/mPa·s | 560± 200 | 650± 100 | 750± 100 | 850± 100 | |
Ratio A: B (mai inganci) | 1.4:1 | 1.2:1 | 1:1 | 0.7:1 | |
Yanayin aiki / ℃ | 25 zuwa 40 | ||||
Gel lokaci (30 ℃)*/min | 6 ~ 15 (Mai daidaitawa) | ||||
bayyanar | Hasken rawaya elastomer | ||||
Hardness (share A) | 60± 2 | 70± 2 | 80± 2 | 90± 2 | |
Ƙarfin ƙarfi /MPa | 6 | 8 | 10 | 12 | |
Tsawaita / % | 500 ~ 700 | ||||
karfin hawaye / (kN/m) | 25 | 30 | 40 | 40 | |
Maimaitawa / % | 60 | 55 | 50 | 48 | |
Yawan yawa/(g/cm3) | 1.07 | 1.08 | 1.10 | 1.11 |
Ku rubuta sakonku anan ku aiko mana