MS-930 Silicon Modified sealant
MS-930 Silicon Modified sealant
GABATARWA
MS-930 babban aiki ne, tsaka-tsaki guda ɗaya-bangare sealant dangane da MS polymer.It yana amsawa da ruwa don samar da kayan roba, kuma lokacin tack ɗin kyauta da lokacin warkarwa suna da alaƙa da zafin jiki da zafi. lokacin kyauta da lokacin warkewa, yayin da ƙarancin zafin jiki da ƙarancin zafi kuma na iya jinkirta wannan tsari.
MS-930 yana da cikakken aikin hatimi na roba da mannewa.Ya dace da sassan da ke buƙatar hatimi na roba tare da wasu ƙarfin mannewa.
MS-930 ba shi da wari, ba shi da ƙarfi, kyauta na isocyanate da kuma PVC kyauta .Yana da kyau adhesion zuwa abubuwa da yawa kuma baya buƙatar maɗaukaki, wanda kuma ya dace da fentin fenti.Wannan samfurin an tabbatar da samun kyakkyawan juriya na UV. , don haka ana iya amfani da shi duka a cikin gida da waje.
SIFFOFI
A) Babu formaldehyde, babu sauran ƙarfi, babu ƙamshi na musamman
B) Babu mai silicone, babu lalata kuma babu gurɓataccen abu ga ma'aunin, yanayin yanayi
C) Kyakkyawan mannewa na abubuwa iri-iri ba tare da firamare ba
D) Kyakkyawan kayan inji
E) Tsayayyen launi, kyakkyawan juriya na UV
F) Bangaren guda ɗaya, mai sauƙin ginawa
G) Ana iya fenti
APPLICATION
Masana'antu masana'antu, kamar hada mota, jirgin ruwa masana'antu, jirgin kasa masana'anta, kwantena tsarin karfe.
Ms-930 yana da kyau mannewa ga mafi yawan kayan: kamar aluminum (goge, anodized), tagulla, karfe, bakin karfe, gilashin, ABS, wuya PVC da mafi thermoplastic kayan.Dole ne a cire wakilin sakin fim a kan filastik kafin mannewa.
Muhimmiyar sanarwa: PE, PP, PTFE baya tsayawa ga relay, kayan da aka ambata a sama ba a ba da shawarar gwadawa da farko ba.
Dole ne farfajiyar da aka yi amfani da ita ta zama mai tsabta, bushe kuma ba ta da mai.
BAYANIN FASAHA
| Launi | Fari/Baki/Grey |
| wari | N/A |
| Matsayi | Thixotropy |
| Yawan yawa | 1.49g/cm 3 |
| M abun ciki | 100% |
| Hanyar warkewa | Maganin danshi |
| Lokacin bushewar saman | ≤30min* |
| Yawan warkewa | 4mm/24h* |
| Ƙarfin ƙarfi | Ƙaddamarwa 3.0 MPa |
| Tsawaitawa | ≥ 150% |
| Yanayin aiki | -40 ℃ zuwa 100 ℃ |
* Standard yanayi: zazzabi 23 + 2 ℃, Dangi zafi 50± 5%
HANYAR APPLICATION
Ya kamata a yi amfani da madaidaicin jagorar ko bindigar manne mai pneumatic don marufi mai laushi, kuma ana ba da shawarar sarrafa tsakanin 0.2-0.4mpa lokacin amfani da bindigar manne mai huhu.Matsakaicin zafin jiki zai haifar da ƙara danko, ana ba da shawarar yin preheat masu rufewa a cikin zafin jiki kafin aikace-aikacen.
YIN SHAFA
Ana iya fentin Ms-930, duk da haka, ana ba da shawarar gwajin dacewa don fenti iri-iri.
AJIYA
Adana zafin jiki: 5 ℃ zuwa 30 ℃
Lokacin ajiya: watanni 9 a cikin marufi na asali.
