MDI Prepolymer
Tauri: Tekun A 75A - Tekun A 95A
Samfurin yana da halayen halayen juriya mai kyau, juriya da kyawawan kaddarorin inji.
An yi amfani da shi don yin samfuran elastomer na polyurethane daban-daban kamar ƙafafun roba, faranti na sieve da zoben rufewa.
Samfura
| D2560 | D2575 | D2590 | D3565 | D3575 | D3590 |
NCO/% | 6.0± 0.2 | 7.5± 0.2 | 9.0± 0.2 | 6.5± 0.2 | 7.5± 0.2 | 9.0± 0.2 |
Jihar a 20 ℃ | Tsarin PTMG, farin m | Tsarin polyester, farin m | ||||
BDO100 g prepolymer / g | 6.1 | 7.8 | 9.3 | 6.8 | 7.8 | 9.3 |
Dankowa (85 ℃)/mPa·s | 1400 | 1000 | 750 | 1400 | 1200 | 1000 |
Haɗin zafin jiki / ℃ (Prepolymer / 1,4BD) | 80/40 | 80/40 | 80/40 | 80/40 | 80/40 | 80/40 |
Lokacin gel / min | 10 | 8 | 7 | 10 | 8 | 7 |
Lokacin vulcanization (110 ℃) / h | 48 | 48 | 48 | 48 | 48 | 48 |
Hardness ( Shore A) | 87±2 | 90± 2 | 95±2 | 85±2 | 90± 2 | 95±2 |
100% Modulus/MPa | 6 | 9.2 | 12.6 | 5 | 8.6 | 12.3 |
300% Modul / MPa | 17 | 16.6 | 18.9 | 10 | 19.7 | 29.1 |
Ƙarfin ƙarfi /MPa | 44 | 43 | 45 | 50 | 46 | 55 |
Tsawaita / % | 472 | 683 | 500 | 540 | 580 | 530 |
Ƙarfin hawaye / (KN/m) | 75 | 110 | 130 | 82 | 117 | 132 |
Maimaitawa / % | 61 | 64 | 55 | 43 | 35 | 39 |
Girman (24 ℃)/(g/cm3) | 1.11 | 1.11 | 1.12 | 1.23 | 1.26 | 1.24 |
Din wear /mm³ | 36 | 44 | 44 | 32 | 35 | 38 |
Ku rubuta sakonku anan ku aiko mana