Good quality Doncool 105 Hfc-365mfc Base Blend Polyols - Doncool 103 CP/IP base blend polyols – INOV
Good quality Doncool 105 Hfc-365mfc Base Blend Polyols - Doncool 103 CP/IP base blend polyols – INOV Detail:
Doncool 103 CP/IP base blend polyols
INTRODUCTION
Doncool 103 is blend polyols uses CP or CP/IP as blowing agent, which applies to refrigerators, freezers, and other insulation products. The characteristics of the products are as follows
1. Excellent flow ability, the density of the foam is well-distributed, and the thermal conductivity is low
2. Excellent low-temperature dimensional stability and good cohesiveness;
3. Demoulding time is 6-8 minutes.
PHYSICAL PROPERTY
Appearance |
Pale yellow transparent liquid |
Hydroxyl value mgKOH/g |
360-420 |
Dynamic viscosity(25℃) mPa.S |
3000-4000 |
Specific gravity (20℃) g/ml |
1.06-1.08 |
Storage temperature ℃ |
10-25 |
Pot life Month |
6 |
RECOMMENDED RATIO
|
pbw |
Doncool 102 |
100 |
CP or CP/IP |
12-14 |
Isocyanate |
136-142 |
TECHNOLOGY AND REACTIVITY (the actual value varied as per process conditions)
|
Manual mixing |
High pressure machine |
Material Temperature ℃ |
20-25 |
20-25 |
Mould Temperature ℃ |
35-40 |
35-40 |
Cream time s |
12-16 |
8-12 |
Gel time s |
75-85 |
50-70 |
Tack free time s |
100-120 |
70-100 |
Free density kg/m3 |
25-26 |
24-25 |
FOAM PERFORMANCES
Mold density | GB/T 6343 | ≥35kg/m3 |
Closed-cell rate | GB/T 10799 |
≥90% |
Thermal conductivity (15℃) | GB/T 3399 | ≤22 mW/(m.K) |
Compression strength | GB/T8813 | ≥150kPa |
Dimensional stability 24h -20℃ | GB/T8811 |
≤0.5% |
24h 100℃ |
≤1.0% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
Our focus on should be to consolidate and enhance the quality and repair of present products, in the meantime constantly establish new products to meet unique customers' requires for Good quality Doncool 105 Hfc-365mfc Base Blend Polyols - Doncool 103 CP/IP base blend polyols – INOV , The product will supply to all over the world, such as: Amman, Congo, Porto, Our company has already had a lot of top factories and professional technology teams in China, offering the best products, techniques and services to worldwide customers. Honesty is our principle, professional operation is our work, service is our goal, and customers' satisfaction is our future!
By John from Qatar - 2018.12.10 19:03
Good quality and fast delivery, it's very nice. Some products have a little bit problem, but the supplier replaced timely, overall, we are satisfied.
By Mildred from Belgium - 2017.03.08 14:45