PES / TDI rige
hurdens: shore A 60A - shore D 70D
It produkt hat de skaaimerken fan goede operability, breed hurdens berik, goede wear ferset, fearkrêft en treflike meganyske eigenskippen.
Wurdt brûkt foar it meitsjen fan ferskate polyurethane elastomere produkten lykas rubber tsjillen, sieve platen, skrapers, sealing ringen en bannen.
Model | D3125 | D3136 | D3143 | D3145 | D3160 | D3170 |
NCO/% | 2,5±0,2 | 3,6±0,2 | 4,3±0,2 | 4,5±0,2 | 6,0±0,2 | 7,0±0,2 |
Steat by 20 ℃ | wite solide | |||||
MOCA100g Prepolymer /g | 7.2 | 10.5 | 12.5 | 13.2 | 17.2 | 20.0 |
Viskositeit (85 ℃)/mPa·s | 2800 | 1800 | 1300 | 1200 | 900 | 800 |
Mingtemperatuer /℃(Prepolymer /MOCA) | 85/120 | 85/120 | 80/120 | 80/120 | 75/120 | 75/120 |
Gel tiid / min | 16 | 9 | 8 | 7.5 | 5 | 4.5 |
Post-vulkanisaasjetiid (100 ℃) / h | 10 | 10 | 10 | 10 | 10 | 10 |
Hurdheid (Shore A) | 76±2 | 85±2 | 92±2 | 91±2 | 96±2 | 97±2 |
100% Modulus/MPa | 3.4 | 4.2 | 6.3 | 6.7 | 11.5 | 18.0 |
300% Modulus / MPa | 4.1 | 8.3 | 11.8 | 12.5 | 21.3 | 35.7 |
Treksterkte / MPa | 40 | 48 | 50 | 52 | 55 | 55 |
Ferlinging / % | 700 | 670 | 630 | 610 | 530 | 410 |
Tear sterkte / (KN/m) | 55 | 75 | 105 | 95 | 124 | 152 |
Rebound / % | 42 | 39 | 37 | 32 | 33 | 33 |
Tichtheid (24℃)/(g/cm3) | 1.25 | 1.26 | 1.27 | 1.27 | 1.29 | 1.29 |
Din wear /mm³ | 33 | 40 | 48 | 53 | 57 | 56 |
|
|
|
|
|
|
|
Model | D3230 | D3236 | D3243 | D3245 | D3249 | D3260 |
NCO/% | 3,0±0,2 | 3,6±0,2 | 4,3±0,2 | 4,5±0,2 | 4,9±0,2 | 6,0±0,2 |
Steat by 20 ℃ | wite solide | |||||
MOCA 100g Prepolymer /g | 8.6 | 10.5 | 12.5 | 13 | 14.5 | 17.5 |
Viskositeit (85 ℃)/mPa·s | 2500 | 2000 | 1400 | 1300 | 900 | 1200 |
Mingtemperatuer /℃(Prepolymer /MOCA) | 85/120 | 80/120 | 80/120 | 80/120 | 75/120 | 75/110 |
Gel tiid / min | 5 | 4 | 4 | 3 | 3 | 2 |
Post-vulkanisaasjetiid (100 ℃) / h | 10 | 10 | 10 | 10 | 10 | 10 |
Hurdheid (Shore A) | 80±2 | 86 | 92±1 | 92±1 | 94±1 | 96 (52D) |
100% Modulus/MPa | 4.0 | 5.1 | 6.1 | 6.8 | 7.3 | 12.2 |
300% Modulus / MPa | 6.5 | 9.8 | 11.4 | 12.6 | 13.4 | 20.9 |
Treksterkte / MPa | 45 | 49 | 48 | 49 | 50 | 58 |
Ferlinging / % | 750 | 690 | 650 | 600 | 580 | 530 |
Tear sterkte / (KN/m) | 61 | 88 | 99 | 100 | 106 | 132 |
Rebound / % | 38 | 44 | 37 | 38 | 41 | 41 |
Tichtheid (24℃)/(g/cm3) | 1.25 | 1.26 | 1.27 | 1.27 | 1.27 | 1.28 |
Din wear /mm³ | 41 | 44 | 44 | 50 | 54 | 55 |