Factory wholesale Water Permeable Running Track - DTPU-401 – INOV
Factory wholesale Water Permeable Running Track - DTPU-401 – INOV Detail:
DOPU-201 Eco-friendly Hydrophobic Polyurethane Grouting Material
INTRODUCTION
DTPU-401 is a one component polyurethane coating with isocyanate, polyether polyol as main raw materials, moisture-curing polyurethane waterproof coating.
Especially used for horizontal plane. When this coating is applied on surface substrate, it has chemical reaction with the moisture in the air, and then it will form a seamless elastomeric rubber waterproof membrane.
APPLICATION
● Undergrounds;
● Parking garages;
● Subways in open cut method;
● Channels;
● Kitchen or bathroom;
● Floors, balcony and unexposed roofs;
● Swimming pools, man-made fountain and other pools;
● Top plate at plazas.
ADVANTAGES
● Good tensile strength and elongation;
● Both high and low temperature resistance;
● Strong adhesive;
● Seamless, no pinholes and bubbles;
● Resistance to long-term water erosion;
● Corrosion-resisting and mould-resisting;
● Convenient to apply.
TYPICAL PROPERTIES
Item | Requirement | Test Method |
Hardness | ≥50 | ASTM D 2240 |
Weight Loss | ≤20% | ASTM C 1250 |
Low temperature crack bridging | No cracking | ASTM C 1305 |
Film thickness(vertical surface) | 1.5mm±0.1mm | ASTM C 836 |
Tensile strength /MPa | 2.8 | GB/T 19250-2013 |
Elongation at break /% | 700 | GB/T 19250-2013 |
Tear strength /kN/m | 16.5 | GB/T 19250-2013 |
Stability | ≥6 months | GB/T 19250-2013 |
PACKAGING
DTPU-401 is sealed in 20kg or 22.5kg pails and transported in wooden cases.
STORAGE
DTPU-401 material should be stored by sealed pails at dry and well-ventilated places and protected from sun or rain. The temperature in stored places can not be higher than 40° C. It can not be closed to fire sources. The normal shelf life is 6 months.
TRANSPORTATION
DTPU-401 is needed to be avoided sunshine and rain. Fire sources are forbidden during transportation.
CONSTRUCTIVE SYSTEM
The system is basically consisted of substrate, additional layer, waterproof coated membrane and protection layer.
COVERAGE
1.7kg per m2 gives dft 1mm minimum. Coverage may vary with the substrate condition during application.
SURFACE PREPARATION
Surfaces should be dry, stable, clean, smooth, without pockmarks or honeycombs and free from any dusts, oil or loose particles. Cracks and surface irregularities need to be filled by sealants and do additional waterproofing. For smooth and stable surfaces, this step can be skipped.
Product detail pictures:
Related Product Guide:
With responsible good quality method, good status and excellent client services, the series of solutions produced by our company are exported to lots of countries and regions for Factory wholesale Water Permeable Running Track - DTPU-401 – INOV , The product will supply to all over the world, such as: Berlin, Israel, Mali, After years of development, we have formed strong ability in new product development and strict quality control system to ensure excellent quality and service. With the support of many long term cooperated customers, our products are welcomed all over the world.
By Mario from Swedish - 2017.09.22 11:32
This is a very professional wholesaler, we always come to their company for procurement, good quality and cheap.
By Joanna from Senegal - 2017.04.28 15:45