China Factory Cheap Hot Casting Pu Shoe Mould Resin - MS-930 Silicon Modified sealant – INOV Manufacturer and Supplier

Factory Cheap Hot Casting Pu Shoe Mould Resin - MS-930 Silicon Modified sealant – INOV

Short Description:

Product Detail

Product Tags

Feedback (2)

Our pursuit and company intention is usually to "Always fulfill our purchaser requirements". We go on to acquire and layout excellent high quality products for both our previous and new consumers and realize a win-win prospect for our customers too as us for Two-Component Polyurea, Waterproof&Sealant, Vinyl Polyoxyethylene Ether, We would like to take this opportunity to establish long-term business relationships with clients from all over the world.

Factory Cheap Hot Casting Pu Shoe Mould Resin - MS-930 Silicon Modified sealant – INOV Detail:

MS-930 Silicon Modified sealant

INTRODUCTION

MS-930 is a high performance, neutral single-component sealant based on MS polymer.It reacts with water to form an elastic material, and its tack free time and curing time are related to temperature and humidity.Increasing temperature and humidity can reduce tack free time and curing time, while low temperature and low humidity can also delay this process.

MS-930 has the comprehensive performance of elastic seal and adhesion.It is suitable for the parts that need elastic sealing in addition with certain adhesive strength.

MS-930 is odorless, solvent-free, isocyanate free and PVC free .It has good adhesion to many substances and does not require a primer, which is also suitable for spray-painted surface.This product has been proven to have excellent UV resistance, so it can be used both indoors and outdoors.

FEATURES

A) No formaldehyde, no solvent, no peculiar smell

B) No silicone oil, no corrosion and no pollution to the substrate, environment-friendly

C) Good adhesion of a variety of substances without primer

D) Good mechanical property

E) Stable color, good UV resistance

F) Single component, easy to construct

G) Can be painted

APPLICATION

Industry manufacturing, such as car assembling, ship manufacturing, train body manufacturing ,container metal structure.

Ms-930 has good adhesion to most materials: such as aluminum (polished, anodized), brass, steel, stainless steel, glass, ABS, hard PVC and most thermoplastic materials. The film release agent on the plastic must be removed before adhesion.

Important note: PE, PP, PTFE does not stick to the relay, the material mentioned above is not recommended to test first.

The pretreatment substrate surface must be clean, dry and grease-free.

TECHNICAL INDEX

Color	White/Black/Gray
Odour	N/A
Status	Thixotropy
Density	1.49g/cm3
Solid content	100%
Curing mechanism	Moisture curing
Surface dry time	≤ 30min*
Curing rate	4mm/24h*
Tensile strength	≥3.0 MPa
Elongation	≥ 150%
Operating temperature	-40℃ to 100℃

* Standard conditions: temperature 23 + 2 ℃,Relative humidity 50±5%

METHOD OF APPLICATION

The corresponding manual or pneumatic glue gun should be used for soft packaging, and it is recommended to control within 0.2-0.4mpa when pneumatic glue gun is used. Too low temperature will lead to increased viscosity, it is recommended to preheat sealants at room temperature before application.

COATING PERFORMANCE

Ms-930 can be painted, however, adaptability tests are recommended for a wide variety of paints.

STORAGE

Storage temperature: 5 ℃ to 30 ℃

Storage time: 9 months in the original packaging.

Product detail pictures:

Related Product Guide:

We depend on sturdy technical force and continually create sophisticated technologies to meet the demand of Factory Cheap Hot Casting Pu Shoe Mould Resin - MS-930 Silicon Modified sealant – INOV , The product will supply to all over the world, such as: Serbia, Japan, Swedish, Please feel cost-free to send us your specifications and we'll respond to you asap. We've got a professional engineering team to serve for the every single detailed needs. Free samples may be sent for you personally to know far more facts. So that you can meet your desires, please really feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.

Case Series Case