Excellent quality Donspray 504 Hfc-245fa Base Blend Polyols - Donpipe 322 HCFC-141b base blend polyols for pipeline shell – INOV
Excellent quality Donspray 504 Hfc-245fa Base Blend Polyols - Donpipe 322 HCFC-141b base blend polyols for pipeline shell – INOV Detail:
Donpipe 322 HCFC-141b base blend polyols for pipeline shell
INTRODUCTION
DonPipe 322 is a kind of blend polyols with hcfc-141b as foaming agent, taking polyol as the main raw material, mixing with a special auxiliary. This material suitable for outer thermal insulation shells which are used for water, oil and gas pipelines .The polyurethane product prepared by reacting it with isocyanate has the following advantages:
– good compressive strength and dimensional stability
– high close-cell rate and good waterproof performance
– good insulation performance
PHYSICAL PROPERTY
DonPipe 322 |
|
Appearance
Hydroxyl value mgKOH/g Dynamic viscosity (25℃) mPa.S Density (20℃) g/ml Storage temperature ℃ Storage stability months |
Light yellow transparent viscous liquid 200-400 200-400 1.1-1.16 10-25 6 |
RECOMMENDED RATIO
Pbw |
|
DonPipe 322
Isocyanate |
100 120-160 |
TECHNOLOGY AND REACTIVITY (the exact value varies depending on processing conditions)
Manual mix |
High pressure |
|
Raw material temperature ℃
CT S GT S TFT S Free density Kg/m3 |
20-25 7-15 30-50 40-60 25-30 |
20-25 6-12 20-40 30-50 25-30 |
FOAM PERFORMANCES
old density
Close-cell rate Thermal conductivity (10℃) Compression strength) Dimensional stability 24h -20℃ 24h 100℃ Flammability |
GB/T 6343 GB/T 10799 GB/T 3399 GB/T 8813 GB/T 8811
GB/T 8624 |
≥50Kg/m3 ≥90% ≤22mW/m.k ≥150 KPa ≤0.5% ≤1.0% B3、B2、B1 |
Product detail pictures:
Related Product Guide:
All we do is usually connected with our tenet " Consumer initial, Rely on 1st, devoting around the food stuff packaging and environmental safety for Excellent quality Donspray 504 Hfc-245fa Base Blend Polyols - Donpipe 322 HCFC-141b base blend polyols for pipeline shell – INOV , The product will supply to all over the world, such as: Indonesia, Cancun, Houston, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we are going to continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Norma from Zimbabwe - 2017.11.01 17:04
This company has a lot of ready-made options to choose and also could custom new program according to our demand, which is very nice to meet our needs.
By Phoenix from Netherlands - 2018.11.04 10:32