China Excellent quality Case Series Case - MS-930 Silicon Modified sealant – INOV Manufacturer and Supplier

Excellent quality Case Series Case - MS-930 Silicon Modified sealant – INOV

Short Description:

Product Detail

Product Tags

Feedback (2)

We've been committed to offering easy,time-saving and money-saving one-stop purchasing support of consumer for Athletic Track, Adhesive Film, High Hardness, We welcome buyers, business enterprise associations and good friends from all sections in the planet to get hold of us and request cooperation for mutual gains.

Excellent quality Case Series Case - MS-930 Silicon Modified sealant – INOV Detail:

MS-930 Silicon Modified sealant

INTRODUCTION

MS-930 is a high performance, neutral single-component sealant based on MS polymer.It reacts with water to form an elastic material, and its tack free time and curing time are related to temperature and humidity.Increasing temperature and humidity can reduce tack free time and curing time, while low temperature and low humidity can also delay this process.

MS-930 has the comprehensive performance of elastic seal and adhesion.It is suitable for the parts that need elastic sealing in addition with certain adhesive strength.

MS-930 is odorless, solvent-free, isocyanate free and PVC free .It has good adhesion to many substances and does not require a primer, which is also suitable for spray-painted surface.This product has been proven to have excellent UV resistance, so it can be used both indoors and outdoors.

FEATURES

A) No formaldehyde, no solvent, no peculiar smell

B) No silicone oil, no corrosion and no pollution to the substrate, environment-friendly

C) Good adhesion of a variety of substances without primer

D) Good mechanical property

E) Stable color, good UV resistance

F) Single component, easy to construct

G) Can be painted

APPLICATION

Industry manufacturing, such as car assembling, ship manufacturing, train body manufacturing ,container metal structure.

Ms-930 has good adhesion to most materials: such as aluminum (polished, anodized), brass, steel, stainless steel, glass, ABS, hard PVC and most thermoplastic materials. The film release agent on the plastic must be removed before adhesion.

Important note: PE, PP, PTFE does not stick to the relay, the material mentioned above is not recommended to test first.

The pretreatment substrate surface must be clean, dry and grease-free.

TECHNICAL INDEX

Color	White/Black/Gray
Odour	N/A
Status	Thixotropy
Density	1.49g/cm3
Solid content	100%
Curing mechanism	Moisture curing
Surface dry time	≤ 30min*
Curing rate	4mm/24h*
Tensile strength	≥3.0 MPa
Elongation	≥ 150%
Operating temperature	-40℃ to 100℃

* Standard conditions: temperature 23 + 2 ℃,Relative humidity 50±5%

METHOD OF APPLICATION

The corresponding manual or pneumatic glue gun should be used for soft packaging, and it is recommended to control within 0.2-0.4mpa when pneumatic glue gun is used. Too low temperature will lead to increased viscosity, it is recommended to preheat sealants at room temperature before application.

COATING PERFORMANCE

Ms-930 can be painted, however, adaptability tests are recommended for a wide variety of paints.

STORAGE

Storage temperature: 5 ℃ to 30 ℃

Storage time: 9 months in the original packaging.

Product detail pictures:

Related Product Guide:

Our concentrate on should be to consolidate and enhance the quality and service of present products, meanwhile consistently produce new products to meet unique customers' demands for Excellent quality Case Series Case - MS-930 Silicon Modified sealant – INOV , The product will supply to all over the world, such as: Dominica, Nepal, Pakistan, We have exported our products all over the world, especially the USA and European countries. Furthermore, all of our products are manufactured with advanced equipment and strict QC procedures to ensure high quality.If you are interested in any of our products, please don't hesitate to contact us. We will try our best to meet your needs.

Casting Pu Gel Insole Resin

Casting Pu Shoe Mould Resin

Dopu-201 Hydrophobic Groutings

Isoprenol Alcohol Ethoxylate

Low Hardness Pu Gel Material

Methallyl Alcohol Ethoxylate

Ms Sealant

Ms Sealant 920

Room Temperature Curing System

Water Reducing Agent Polyether

Managers are visionary, they have the idea of "mutual benefits, continuous improvement and innovation", we have a pleasant conversation and Cooperation.