Chinese wholesale Thermoplastic Polyurethane Series - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV
Chinese wholesale Thermoplastic Polyurethane Series - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV Detail:
Doncool 106 CP/ HFO-1233zd base blend polyols
INTRODUCTION
DonCool 106 blend polyols use CP mixed with HFO-1233zd as blowing agent, it applies to refrigerators, freezers, electric water heaters and other products thermal insulation, the characteristics are as follows,
1-Excellent flowability, foam density distributes uniformity, low thermal conductivity
2- Outstanding low temperature dimension stability and cohesiveness
3-Demoulding time is 4-8min.
PHYSICAL PROPERTY
| Appearance |
Yellowish-brown transparent liquid |
| Hydroxyl Value mgKOH/g |
320-370 |
| Dynamic Viscosity /25℃ mPa.s |
4000-5000 |
| Specific Gravity /20℃ g/ml |
1.05-1.10 |
| Storage Temperature ℃ |
10-20 |
| Shelf life (unmixed materials)※ Month |
3 |
| Shelf life (premixed materials) ※ Month |
1 (Material Temperature below 20℃) |
※Store in dry original drums/IBCs at recommended storage temperature.
RECOMMENDED RATIO
|
pbw |
|
| DonCool 106 blend polyols |
100 |
| CP |
12.5 |
| LBA |
7 |
| ISO |
143.4-149.4 |
TECHNOLOGY AND REACTIVITY CHARACTERISTICS (Material Temperature is 20℃, the actual value varied as per process conditions)
|
Manual Mixing（low pressure machine) |
High Pressure Machine Mixing |
|
| Cream Time s
Gel time s Tack free time s Free density kg/m3 |
8-10 70-80 100-130 23-23.5 |
6-8 50-70 70-100 22-23 |
FOAM PERFORMANCES
| Moulding Density | GB/T 6343 | 30-32kg/m3 |
| Closed-cell rate | GB/T 10799 | ≥90% |
| Thermal Conductivity（10℃） | GB/T 3399 | ≤18.5 mW/(m.K) |
| Compressive strength | GB/T 8813 | ≥140kPa |
| Dimensional stability 24h -20℃ | GB/T 8811
|
≤1.0% |
|
24h 100℃ |
≤1.5% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
As for competitive prices, we believe that you will be searching far and wide for anything that can beat us. We can state with absolute certainty that for such quality at such prices we are the lowest around for Chinese wholesale Thermoplastic Polyurethane Series - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV , The product will supply to all over the world, such as: Algeria, British, Cannes, Excellent quality comes from our adherence to every detail, and customer satisfaction comes from our sincere dedication. Relying on advanced technology and industry reputation of good cooperation, we try our best to provide more quality products and services to our customers, and all of us are willing to strengthen exchanges with domestic and foreign customers and sincere cooperation, to build a better future.
By Joyce from Mexico - 2017.12.09 14:01
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Mike from Indonesia - 2017.01.28 18:53
Products categories
-
2019 China New Design High Hardness Two Compone...
-
Factory Cheap Hot Automotive Industry - PTMEG/...
-
New Arrival China Donpce Ses-101 - Bicycle Sea...
-
Professional China Ms Sealant 910 - DDPU-301 p...
-
Wholesale Price China Ppg2000 2000 - Pu Shoe U...
-
2019 China New Design Pu Caoting - Special Ser...