Chinese wholesale Thermoplastic Polyurethane Series - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV
Chinese wholesale Thermoplastic Polyurethane Series - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV Detail:
Doncool 106 CP/ HFO-1233zd base blend polyols
INTRODUCTION
DonCool 106 blend polyols use CP mixed with HFO-1233zd as blowing agent, it applies to refrigerators, freezers, electric water heaters and other products thermal insulation, the characteristics are as follows,
1-Excellent flowability, foam density distributes uniformity, low thermal conductivity
2- Outstanding low temperature dimension stability and cohesiveness
3-Demoulding time is 4-8min.
PHYSICAL PROPERTY
| Appearance |
Yellowish-brown transparent liquid |
| Hydroxyl Value mgKOH/g |
320-370 |
| Dynamic Viscosity /25℃ mPa.s |
4000-5000 |
| Specific Gravity /20℃ g/ml |
1.05-1.10 |
| Storage Temperature ℃ |
10-20 |
| Shelf life (unmixed materials)※ Month |
3 |
| Shelf life (premixed materials) ※ Month |
1 (Material Temperature below 20℃) |
※Store in dry original drums/IBCs at recommended storage temperature.
RECOMMENDED RATIO
|
pbw |
|
| DonCool 106 blend polyols |
100 |
| CP |
12.5 |
| LBA |
7 |
| ISO |
143.4-149.4 |
TECHNOLOGY AND REACTIVITY CHARACTERISTICS (Material Temperature is 20℃, the actual value varied as per process conditions)
|
Manual Mixing（low pressure machine) |
High Pressure Machine Mixing |
|
| Cream Time s
Gel time s Tack free time s Free density kg/m3 |
8-10 70-80 100-130 23-23.5 |
6-8 50-70 70-100 22-23 |
FOAM PERFORMANCES
| Moulding Density | GB/T 6343 | 30-32kg/m3 |
| Closed-cell rate | GB/T 10799 | ≥90% |
| Thermal Conductivity（10℃） | GB/T 3399 | ≤18.5 mW/(m.K) |
| Compressive strength | GB/T 8813 | ≥140kPa |
| Dimensional stability 24h -20℃ | GB/T 8811
|
≤1.0% |
|
24h 100℃ |
≤1.5% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
continue to improve, to ensure product quality in line with market and customer standard requirements. Our company has a quality assurance system have been established for Chinese wholesale Thermoplastic Polyurethane Series - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV , The product will supply to all over the world, such as: Turin, Orlando, New Zealand, Aiming to grow to be by far the most professional supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal goods. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. Detailed data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're going to allow you to get complete acknowledge about our items and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.
By Melissa from Israel - 2017.08.15 12:36
The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
By Andrea from Tunisia - 2017.05.21 12:31
Products categories
-
Professional China Ms Sealant 910 - MS-930 Sil...
-
Wholesale Boxing Gloves System - Solvent resis...
-
2019 High quality Rigid Foam Series - Hot-melt...
-
2019 Good Quality Modified Silane Sealant - DO...
-
China wholesale Quasi Mdi-Terminated System Mdi...
-
2019 High quality Ms Sealant 920 - MS resin 91...