Chinese Professional Casting Pu Shoe Upper Resin - DSPU-601 – INOV
Chinese Professional Casting Pu Shoe Upper Resin - DSPU-601 – INOV Detail:
DSPU-601
INTRODUCTION
DSPU-601 is two-component polyurea spray type combination, which is used in a variety of base material protection. 100% solid content, no solvents, no volatile, little or no odor, strictly comply with the VOC limit standard, belongs to the environmentally friendly materials.
PHYSICAL PROPERTIES
| Item | Unit | Polyether component | Isocyanate component |
| Appearance | viscous liquid | viscous liquid | |
| Density（20℃） | g/cm3 | 1.02±0.03 | 1.08±0.03 |
| Dynamic Viscosity（25℃） | mPa·s | 650±100 | 800±200 |
| shelf life | month | 6 | 6 |
| Storage Temperature | ℃ | 20-30 | 20-30 |
PRODUCT PACKAGING
200kg /drum
STORAGE
B component (isocyanate) is moisture sensitive. Unused raw materials should be stored in a sealed drum, avoid moisture intrusion .A component (polyether) should stir well before use.
PACKAGING
DTPU-401 is sealed in 20kg or 22.5kg pails and transported in wooden cases.
POTENTIAL HAZARDS
Part B (isocyanates) stimulate the eye, respiratory and skin through breathing and skin contact, and possibly sensitization.
When contact part B ( isocyanates), necessary preventive measures should be taken according to material safety date sheet (MSDS).
WASTE DISPOSAL
With reference to the material safety date sheet (MSDS) of the product, or deal with it in accordance with local laws and regulations.
PROPOSAL OF PROCESS
| Unit | Value | Test Methods | |
| Mix ratio | By volume | 1:1(A:B) | |
| GT | s | 5-10 | GB/T 23446 |
| Surface dry time | s | 15-25 | |
| Temperature of material
-part A -part B |
℃ | 65-70 | |
| Pressure of material
-Part A -Part B |
PSI | 2500 |
PHYSICAL PROPERTIES OF FINISHED PRODUCT
| DSPU-601 | Unit | Test Methods | |
| Hardness | ≥80 | Shore A | GB/T 531.1 |
| Tensile Strength | ≥16 | MPa | GB/T 16777 |
| Elongation at break | ≥450 | % | |
| Tear strength | ≥50 | N/mm | GB/T 529 |
| impervious | ℃ | GB/T 16777 | |
| Bibulous rate | ≤5 | % | GB/T 23446 |
| solid content | 100 | % | GB/T 16777 |
| Adhesive strength, dry base material | ≥2 | Mpa |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
To be a result of ours specialty and repair consciousness, our corporation has won an excellent reputation amongst customers all around the entire world for Chinese Professional Casting Pu Shoe Upper Resin - DSPU-601 – INOV , The product will supply to all over the world, such as: Morocco, Uzbekistan, Luxembourg, Our company always committed to meet your quality demand, price points and sales target. Warmly welcome you open the boundaries of communication. It is our great pleasure to service you if you need a trusted supplier and value information.
By Elaine from Honduras - 2018.02.12 14:52
The enterprise has a strong capital and competitive power, product is sufficient, reliable, so we have no worries on cooperating with them.
By Elaine from Comoros - 2018.11.06 10:04
