Bottom price Castable Polyurethane Gel Insole Prepolymer - Doncool 102 HCFC-141B base blend polyols – INOV
Bottom price Castable Polyurethane Gel Insole Prepolymer - Doncool 102 HCFC-141B base blend polyols – INOV Detail:
Doncool 102 HCFC-141B base blend polyols
INTRODUCTION
DonCool 102 is blend polyols, uses the HCFC-141B as blowing agent, which is the substitution of CFC-11 in polyurethane industry, it applies to refrigerators, icebox and other thermal insulation products, the characteristics are as follows,
1. Excellent flow ability, foam density distributes uniformity, low thermal conductivity
2. Excellent low temperature dimension stability and cohesiveness
3. Demould time 6~8 minutes
PHYSICAL PROPERTY
| Appearance |
Pale yellow transparent liquid |
| Hydroxyl value mgKOH/g |
300-360 |
| Dynamic viscosity（25℃） mPa.S |
250-500 |
| Specific gravity (20℃) g/ml |
1.10-1.15 |
| Storage temperature ℃ |
10-25 |
| Pot life Month |
6 |
RECOMMENDED RATIO
|
|
pbw |
|
Doncool 102 |
100 |
|
POL: ISO |
1.0:1.1 |
TECHNOLOGY AND REACTIVITY (the actual value varied as per process conditions)
|
|
Manual mixing |
High pressure machine |
| Material Temperature ℃ |
20-25 |
20-25 |
| Mould Temperature ℃ |
35-40 |
35-40 |
| Cream time s |
12±2 |
10±2 |
| Gel time s |
70-90 |
50-70 |
| Tack free time s |
100-120 |
80-100 |
| Free density kg/m3 |
24-26 |
24-26 |
FOAM PERFORMANCES
| Mold density | GB/T 6343 | ≥35kg/m3 |
| Closed-cell rate | GB/T 10799 |
≥92% |
| Thermal conductivity （15℃） | GB/T 3399 | ≤19 mW/(m.K) |
| Compression strength | GB/T8813 | ≥150kPa |
| Dimensional stability 24h -20℃ | GB/T8811 |
≤0.5% |
|
24h 100℃ |
≤1.0% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
Our company has been focusing on brand strategy. Customers' satisfaction is our best advertising. We also supply OEM service for Bottom price Castable Polyurethane Gel Insole Prepolymer - Doncool 102 HCFC-141B base blend polyols – INOV , The product will supply to all over the world, such as: Tunisia, Niger, Mombasa, Relying on superior quality and excellent post-sales, our products sell well in America, Europe, the Middle East and South Africa. We are also the appointed OEM factory for several worlds' famous products brands. Welcome to contact us for further negotiation and cooperation.
By Cara from Guyana - 2018.02.21 12:14
The company's products can meet our diverse needs, and the price is cheap, the most important is that the quality is also very nice.
By Anna from Australia - 2017.03.07 13:42
