2019 wholesale price Ms Sealant&Ms Polymer - DSPU-601 – INOV
2019 wholesale price Ms Sealant&Ms Polymer - DSPU-601 – INOV Detail:
DSPU-601
INTRODUCTION
DSPU-601 is two-component polyurea spray type combination, which is used in a variety of base material protection. 100% solid content, no solvents, no volatile, little or no odor, strictly comply with the VOC limit standard, belongs to the environmentally friendly materials.
PHYSICAL PROPERTIES
Item | Unit | Polyether component | Isocyanate component |
Appearance | viscous liquid | viscous liquid | |
Density(20℃) | g/cm3 | 1.02±0.03 | 1.08±0.03 |
Dynamic Viscosity(25℃) | mPa·s | 650±100 | 800±200 |
shelf life | month | 6 | 6 |
Storage Temperature | ℃ | 20-30 | 20-30 |
PRODUCT PACKAGING
200kg /drum
STORAGE
B component (isocyanate) is moisture sensitive. Unused raw materials should be stored in a sealed drum, avoid moisture intrusion .A component (polyether) should stir well before use.
PACKAGING
DTPU-401 is sealed in 20kg or 22.5kg pails and transported in wooden cases.
POTENTIAL HAZARDS
Part B (isocyanates) stimulate the eye, respiratory and skin through breathing and skin contact, and possibly sensitization.
When contact part B ( isocyanates), necessary preventive measures should be taken according to material safety date sheet (MSDS).
WASTE DISPOSAL
With reference to the material safety date sheet (MSDS) of the product, or deal with it in accordance with local laws and regulations.
PROPOSAL OF PROCESS
Unit | Value | Test Methods | |
Mix ratio | By volume | 1:1(A:B) | |
GT | s | 5-10 | GB/T 23446 |
Surface dry time | s | 15-25 | |
Temperature of material
-part A -part B |
℃ | 65-70 | |
Pressure of material
-Part A -Part B |
PSI | 2500 |
PHYSICAL PROPERTIES OF FINISHED PRODUCT
DSPU-601 | Unit | Test Methods | |
Hardness | ≥80 | Shore A | GB/T 531.1 |
Tensile Strength | ≥16 | MPa | GB/T 16777 |
Elongation at break | ≥450 | % | |
Tear strength | ≥50 | N/mm | GB/T 529 |
impervious | ℃ | GB/T 16777 | |
Bibulous rate | ≤5 | % | GB/T 23446 |
solid content | 100 | % | GB/T 16777 |
Adhesive strength, dry base material | ≥2 | Mpa |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
We're proud from the higher client fulfillment and wide acceptance due to our persistent pursuit of high quality both on product and service for 2019 wholesale price Ms Sealant&Ms Polymer - DSPU-601 – INOV , The product will supply to all over the world, such as: Maldives, New York, Palestine, Our products have won an excellent reputation at each of the related nations. Because the establishment of our firm. we have insisted on our production procedure innovation together with the most recent modern day managing method, attracting a sizable quantity of talents within this industry. We regard the solution good quality as our most vital essence character.
By Vanessa from Chicago - 2018.06.19 10:42
The company comply with the contract strict, a very reputable manufacturers, worthy a long-term cooperation.
By Johnny from Johannesburg - 2017.03.28 12:22