China 2019 Good Quality Thermoplastic Polyurethane Resin - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV Manufacturer and Supplier

2019 Good Quality Thermoplastic Polyurethane Resin - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV

Short Description:

Product Detail

Product Tags

Feedback (2)

To constantly improve the management system by virtue of the rule of "sincerely, good faith and quality are the base of enterprise development", we widely absorb the essence of related products internationally, and constantly develop new products to meet the demands of customers for Pu System For Pouring, Water Heater Series, Concrete Additive, We've been honest and open up. We glance ahead on your pay a visit to and developing trustworthy and long-term standing relationship.

2019 Good Quality Thermoplastic Polyurethane Resin - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV Detail:

Doncool 106 CP/ HFO-1233zd base blend polyols

INTRODUCTION

DonCool 106 blend polyols use CP mixed with HFO-1233zd as blowing agent, it applies to refrigerators, freezers, electric water heaters and other products thermal insulation, the characteristics are as follows,

1-Excellent flowability, foam density distributes uniformity, low thermal conductivity

2- Outstanding low temperature dimension stability and cohesiveness

3-Demoulding time is 4-8min.

PHYSICAL PROPERTY

Appearance	Yellowish-brown transparent liquid
Hydroxyl Value mgKOH/g	320-370
Dynamic Viscosity /25℃ mPa.s	4000-5000
Specific Gravity /20℃ g/ml	1.05-1.10
Storage Temperature ℃	10-20
Shelf life (unmixed materials)※ Month	3
Shelf life (premixed materials) ※ Month	1 (Material Temperature below 20℃)

※Store in dry original drums/IBCs at recommended storage temperature.

RECOMMENDED RATIO

	pbw
DonCool 106 blend polyols	100
CP	12.5
LBA	7
ISO	143.4-149.4

TECHNOLOGY AND REACTIVITY CHARACTERISTICS (Material Temperature is 20℃, the actual value varied as per process conditions)

Manual Mixing（low pressure machine)

High Pressure Machine Mixing

Cream Time s

Gel time s

Tack free time s

Free density kg/m³

8-10

70-80

100-130

23-23.5

6-8

50-70

70-100

22-23

FOAM PERFORMANCES

Moulding Density	GB/T 6343	30-32kg/m³
Closed-cell rate	GB/T 10799	≥90%
Thermal Conductivity（10℃）	GB/T 3399	≤18.5 mW/(m.K)
Compressive strength	GB/T 8813	≥140kPa
Dimensional stability 24h -20℃	GB/T 8811	≤1.0%
24h 100℃	GB/T 8811	≤1.5%

The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.

Product detail pictures:

Related Product Guide:

Our organization insists all along the quality policy of "product quality is base of business survival; purchaser gratification is the staring point and ending of an business; persistent improvement is eternal pursuit of staff" as well as the consistent purpose of "reputation 1st, purchaser first" for 2019 Good Quality Thermoplastic Polyurethane Resin - Doncool 106 CP/ HFO-1233zd base blend polyols – INOV , The product will supply to all over the world, such as: Tajikistan, Paraguay, Jakarta, By adhering to the principle of "human oriented, winning by quality", our company sincerely welcomes merchants from at home and abroad to visit us, talk business with us and jointly create a brilliant future.

Castable Polyurethane Prepolymer