2019 Good Quality Modified Silane Sealant - DSPU-601 – INOV
2019 Good Quality Modified Silane Sealant - DSPU-601 – INOV Detail:
DSPU-601
INTRODUCTION
DSPU-601 is two-component polyurea spray type combination, which is used in a variety of base material protection. 100% solid content, no solvents, no volatile, little or no odor, strictly comply with the VOC limit standard, belongs to the environmentally friendly materials.
PHYSICAL PROPERTIES
Item | Unit | Polyether component | Isocyanate component |
Appearance | viscous liquid | viscous liquid | |
Density(20℃) | g/cm3 | 1.02±0.03 | 1.08±0.03 |
Dynamic Viscosity(25℃) | mPa·s | 650±100 | 800±200 |
shelf life | month | 6 | 6 |
Storage Temperature | ℃ | 20-30 | 20-30 |
PRODUCT PACKAGING
200kg /drum
STORAGE
B component (isocyanate) is moisture sensitive. Unused raw materials should be stored in a sealed drum, avoid moisture intrusion .A component (polyether) should stir well before use.
PACKAGING
DTPU-401 is sealed in 20kg or 22.5kg pails and transported in wooden cases.
POTENTIAL HAZARDS
Part B (isocyanates) stimulate the eye, respiratory and skin through breathing and skin contact, and possibly sensitization.
When contact part B ( isocyanates), necessary preventive measures should be taken according to material safety date sheet (MSDS).
WASTE DISPOSAL
With reference to the material safety date sheet (MSDS) of the product, or deal with it in accordance with local laws and regulations.
PROPOSAL OF PROCESS
Unit | Value | Test Methods | |
Mix ratio | By volume | 1:1(A:B) | |
GT | s | 5-10 | GB/T 23446 |
Surface dry time | s | 15-25 | |
Temperature of material
-part A -part B |
℃ | 65-70 | |
Pressure of material
-Part A -Part B |
PSI | 2500 |
PHYSICAL PROPERTIES OF FINISHED PRODUCT
DSPU-601 | Unit | Test Methods | |
Hardness | ≥80 | Shore A | GB/T 531.1 |
Tensile Strength | ≥16 | MPa | GB/T 16777 |
Elongation at break | ≥450 | % | |
Tear strength | ≥50 | N/mm | GB/T 529 |
impervious | ℃ | GB/T 16777 | |
Bibulous rate | ≤5 | % | GB/T 23446 |
solid content | 100 | % | GB/T 16777 |
Adhesive strength, dry base material | ≥2 | Mpa |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
We have been experienced manufacturer. Wining the majority of the crucial certifications of its market for 2019 Good Quality Modified Silane Sealant - DSPU-601 – INOV , The product will supply to all over the world, such as: Nigeria, Slovakia, French, We integrate design, manufacture and export together with more than 100 skillful workers, strict quality controlling system and experienced technology.We keep long term business relationships with wholesaler and distributors form more than 50 countries, such as USA, UK, Canada, Europe and Africa etc.
By Diana from Jeddah - 2018.05.22 12:13
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Hedy from Hongkong - 2018.12.25 12:43