2019 China New Design High Hardness Two Component System - Doncool 105 HFC-365mfc base blend polyols – INOV
2019 China New Design High Hardness Two Component System - Doncool 105 HFC-365mfc base blend polyols – INOV Detail:
Doncool 105 HFC-365mfc base blend polyols
INTRODUCTION
DonCool 105 blend polyols use HFC-365mfc/227ea(93/7) as blowing agent, it applies to refrigerators, freezers, Air conditioning boards and other products thermal insulation.
PHYSICAL PROPERTY
Appearance |
Light yellow transparent liquid |
Hydroxyl Value mgKOH/g |
300-400 |
Dynamic Viscosity /25℃ mPa.s |
400-500 |
Specific Gravity /20℃ g/ml |
1.10-1.15 |
Storage Temperature ℃ |
10-30 |
Shelf life ※ Month |
6 |
※Store in dry original drums/IBCs at recommended storage temperature.
RECOMMENDED RATIO
pbw |
|
DonCool 105 blend polyols |
100 |
ISO |
130-135 |
TECHNOLOGY AND REACTIVITY CHARACTERISTICS (Material Temperature is 20℃, the actual value varied as per process conditions)
Manual Mixing(low pressure machine) |
High Pressure Machine Mixing |
|
Cream Time s
Gel time s Tack free time s Free density kg/m3 |
10-14 65-85 100-130 26-28 |
6-10 45-60 70-100 25-27 |
FOAM PERFORMANCES
Moulding Density | GB/T 6343 | 34-36kg/m3 |
Closed-cell rate | GB/T 10799 | ≥90% |
Thermal Conductivity(10℃) | GB/T 3399 | ≤21 mW/(m.K) |
Compressive strength | GB/T 8813 | ≥150kPa |
Dimensional stability 24h -20℃ | GB/T 8811 | ≤1.0% |
24h 100℃ |
≤1.5% |
The data provided above are typical value, which are tested by our company. For our company’s products, the data included in the law do not have any constraints.
Product detail pictures:
Related Product Guide:
Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction for 2019 China New Design High Hardness Two Component System - Doncool 105 HFC-365mfc base blend polyols – INOV , The product will supply to all over the world, such as: Kenya, Kyrgyzstan, Chicago, We strive for excellence, constant improvement and innovation, is committed to make us the "customer trust" and the "first choice of engineering machinery accessories brand" suppliers. Choose us, sharing a win-win situation!
By Elsie from Mauritius - 2018.06.12 16:22
In China, we have purchased many times, this time is the most successful and most satisfactory, a sincere and realiable Chinese manufacturer!
By Josephine from Korea - 2017.03.08 14:45